Abstract:Core power distribution monitoring in operating power reactors is very important in core surveillance, the 3-D power distribution is one of the basic operation parameters which can determine many other important parameters used to evaluate the operation condition of reactor and the safe margin. Many kinds of on-line monitoring systems, such as BEACON [1] and SCOMS [2], have been developed to estimate in-core power distributions using fixed in-core detectors. In order to get the reliability of the estimated power distribution, the uncertainty analysis procedure of the monitoring system is needed. The uncertainty analysis method [ 1 ] of BEACON system includes a statistical simulation of various core state conditions, power distributions and detector behavior based on the measurement variability. A number of ‘true’ and ‘predicted’ core model pairs are selected to provide the uncertainty analysis with a bounding set of differences that could be encountered between the BEACON core monitor model and plant conditions under normal and off-normal conditions. The uncertainty analysis method used in SCOMS system [2] get the overall uncertainty from the uncertainties of the input parameters. Individual uncertainties of input variables are randomly sampled within the range and then added to the original value. In this study, a new uncertainty analysis method for core power distribution monitoring system SMROMS (Small Modular Reactor On-line Monitoring System) was discussed. SMROMS uses in-core self powered neutron detectors (SPNDs) to monitor the power distribution continuously. This method is different from two methods mentioned above, because the calculation uncertainty and measurement uncertainty are considered separately. A rod controlled small modular reactor developed by Nuclear Power Institute of China, i.e. ACP100-K, was selected as a study case. The 3DCC [3] (3D Coupling Coefficients) power distribution reconstruction method was implemented in SMROMS.

On-line monitoring the incore power distribution by using excore ion-chambers

ICONE23-1692 3D PWR POWER DISTRIBUTION ON-LINE MONITORING BASED ON HARMONICS EXPANSION

On Line Monitoring the Reactor Power Distribution Based on the Data Library of the Eigenfunctions

On-line reconstruction of in-core power distribution by harmonics expansion method

Diagnosis and Processing of Detector Failure in PWR On-Line Power Distribution Monitoring

Study on the Relationship between Ex-core Detector Readings and In-core Power Distribution

On-Line Monitoring The In-Core Flux Distribution Using The Eigenfunctions

Harmonics Expansion Method for On-line Monitoring of PWR Power Distribution

Development and validation of a PWR on-line power-distribution monitoring system

A Reactor Core On-Line Monitoring Program - COMP

The possibility to online reconstruct the htr in-core power distribution

Development and Validation of A Pwr On-Line Power-Distribution Monitoring System Necp-Onion

Uncertainty Analysis of Core Power Distribution Monitoring System SMROMS

Sensitivity and Uncertainty Analysis for the PWR Online Power-Distribution Monitoring with NECP-ONION System

Development and Verification of PWR Core Transient Coupling Calculation Software

On-line monitoring analysis of BEAVRS benchmark using NECP-ONION

Real-time simulations to enhance distributed on-line monitoring and fault detection in Pressurized Water Reactors

Comparisons of SN and Monte-Carlo Methods in PWR Ex-Core Detector Response Simulation

Implementation and Comparison of Least-Square Method and Thin-Plate Spline Method for PWR Online Power-Distribution Monitoring Based on NECP-ONION System

Application of new axial power distribution synthesis method using in-core detector signal in digital core protection system

Preliminary Analysis of Power Control Characteristics for ADS Equipment in China