Abstract:Core power distribution monitoring in operating power reactors is very important in core surveillance, the 3-D power distribution is one of the basic operation parameters which can determine many other important parameters used to evaluate the operation condition of reactor and the safe margin. Many kinds of on-line monitoring systems, such as BEACON [1] and SCOMS [2], have been developed to estimate in-core power distributions using fixed in-core detectors. In order to get the reliability of the estimated power distribution, the uncertainty analysis procedure of the monitoring system is needed. The uncertainty analysis method [ 1 ] of BEACON system includes a statistical simulation of various core state conditions, power distributions and detector behavior based on the measurement variability. A number of ‘true’ and ‘predicted’ core model pairs are selected to provide the uncertainty analysis with a bounding set of differences that could be encountered between the BEACON core monitor model and plant conditions under normal and off-normal conditions. The uncertainty analysis method used in SCOMS system [2] get the overall uncertainty from the uncertainties of the input parameters. Individual uncertainties of input variables are randomly sampled within the range and then added to the original value. In this study, a new uncertainty analysis method for core power distribution monitoring system SMROMS (Small Modular Reactor On-line Monitoring System) was discussed. SMROMS uses in-core self powered neutron detectors (SPNDs) to monitor the power distribution continuously. This method is different from two methods mentioned above, because the calculation uncertainty and measurement uncertainty are considered separately. A rod controlled small modular reactor developed by Nuclear Power Institute of China, i.e. ACP100-K, was selected as a study case. The 3DCC [3] (3D Coupling Coefficients) power distribution reconstruction method was implemented in SMROMS.

Development of three methods for control rod position monitoring based on fixed in-core neutron detectors

A New Monitoring Method for Control Rods Position of Small Modular Reactors (Smrs)-Based Coaxial Capacitor

Study on self-encoding control rod position detector

A New Strategy for Validating Transient Neutronic Solver Using the Measurement Data During the Dynamic Rod Worth Measurement Process

Optimization of Spatial Structure Designs of Control Rod Using Monte Carlo Code RMC

A new algorithm of critical control rod position search in MC code

Control Rod Position Measurement by Two-Electrode Capacitance Sensor in Nuclear Heating Reactor

A Practical Subcritical Rod Worth Measurement Technique Based on the Improved Neutron Source Multiplication Method

A new dynamic rod worth measurement method based on the transient spatial factor

GROUNDED CONTROL ROD POSITION MEASUREMENT WITH TWO-ELECTRODE CAPACITANCE SENSOR

Control rod position reconstruction based on K-Nearest Neighbor Method

Control Rod Position Measurement with Helix-Electrode Capacitance Sensor in Nuclear Heating Reactor

Review on Sensors to Measure Control Rod Position for Nuclear Reactor

On-line monitoring the incore power distribution by using excore ion-chambers

Research on Non-Uniform Control Rod for PWR

Robust Filtering for Dynamic Compensation of Self-Powered Neutron Detectors

Comparisons of SN and Monte-Carlo Methods in PWR Ex-Core Detector Response Simulation

Uncertainty Analysis of Core Power Distribution Monitoring System SMROMS

Neutronics Modelling of Control Rod Compensation Operation in Small Modular Fast Reactor Using OpenMC

Study on digital-analog rod position detector

First Application of Large Reactivity Measurement through Rod Drop Based on Three-Dimensional Space-Time Dynamics