Abstract:Control rod is the most important approach to control reactivity in reactors, which is currently a cluster of pins filled with boron carbide (B4C). In this case, neutrons are captured in the outer region, and thus the inner absorber is inefficient. Moreover, the lifetime of the control rod is challenged due to the high reactivity worth loss resulted from the excessive degradation of B4C in the high flux area. In this work, some control rod designs are proposed with optimized spatial structures including the spatially mixed rod, radially moderated rod, and composite control rod with small-sized pins. The control rod worth and effective absorption cross section of these designs are computed using the Monte Carlo code RMC. A long-time depletion calculation is conducted to evaluate their burnup stability. For the spatially mixed rod, rare-earth absorbers are combined with B4C in spatial structure. Compared with the homogenous B4C rod, mixed designs ensure more sufficient reactivity worth in the lifetime of the reactor. The minimum reactivity loss at the end of the cycle is only 1.8% from the dysprosium titanate rod, while the loss for pure B4C rod is nearly 12%. For the radially moderated design, a doubled neutronic efficiency is achieved when the volume ratio of moderator equals approximately 0.3, while excessive moderating may lead to the failure of control rods. The control rod with small-sized pins processes an enhanced safety performance and saves the investment in absorbers. The rod worth can be further enhanced by introducing small moderator pins, and the reactivity loss caused by the reduction of absorbers is sustainable.

Study on self-encoding control rod position detector

Position indication system of control rod with self-coding detector

Study on digital-analog rod position detector

Self-encoding rod position indicating system of online failure monitoring

Inductance transducer coded by coils and armatures for control rod position

Combination Coding Control Rod Position-Indicating System

Study on Gray Code Control Rod Position Indicator

Tri-code Inductance Control Rod Position Indicator with Several Multi-Coding-bars

Self-coding rod position indicating system based on software compensation

Development of three methods for control rod position monitoring based on fixed in-core neutron detectors

A New Monitoring Method for Control Rods Position of Small Modular Reactors (Smrs)-Based Coaxial Capacitor

Control Rod Position Measurement by Two-Electrode Capacitance Sensor in Nuclear Heating Reactor

Control Rod Position Measurement with Helix-Electrode Capacitance Sensor in Nuclear Heating Reactor

Review on Sensors to Measure Control Rod Position for Nuclear Reactor

A novel encoding water level monitor system during and after LOCAs in a nuclear heating reactor

Research on Non-Uniform Control Rod for PWR

Analysis on Code-variation-region of Digital Inductance Control-rod Position Indicating System

Built-in Capacitance Sensor for Control Rod Position Measurement in NHR-200 with PEEK Material

Research of Dynamic Rod Worth Measurement Technique Based on the Pin-by-pin Response Function

GROUNDED CONTROL ROD POSITION MEASUREMENT WITH TWO-ELECTRODE CAPACITANCE SENSOR

Optimization of Spatial Structure Designs of Control Rod Using Monte Carlo Code RMC