Abstract:Rod position measurement sensor is the key equipment of control rod hydraulic drive line, the measurement accuracy of the sensor is directly related to the safety and reliability of the reactor. Capacitance rod position measurement sensor is generally composed of excitation and detection electrodes, ceramic tube, outer shielding layer and measuring rod. For the double helix capacitance rod position measurement sensor with non-metallic measuring rod, the static characteristic experiment of the sensor was completed, the finite element method was used to establish the calculation model and the model was verified by the experimental results. By the calculation model, the influence of electrode angle, pitch, thickness and relative permittivity of ceramic tube on the eccentricity error of the sensor was systematically analyzed, the optimal combination of design parameters were obtained by orthogonal test method. The results show that the calculation results are in good agreement with the experimental results, the eccentricity error can be reduced by reducing the electrode angle, increasing the electrode pitch, increasing the thickness and reducing the relative permittivity of the ceramic tube. The design scheme of the sensor obtained by the orthogonal test can greatly reduce the eccentricity error and realize the requirement of rod position measurement without losing step. The research results provide guidance for the design and optimization of capacitance rod position measurement sensor.

A New Monitoring Method for Control Rods Position of Small Modular Reactors (Smrs)-Based Coaxial Capacitor

Control Rod Position Measurement by Two-Electrode Capacitance Sensor in Nuclear Heating Reactor

Research on the Capacitance Control Rod Position Measurement Sensor in NHR-200

GROUNDED CONTROL ROD POSITION MEASUREMENT WITH TWO-ELECTRODE CAPACITANCE SENSOR

FRINGE EFFECT CAPACITANCE SENSOR FOR CONTROL ROD POSITION MEASUREMENT

Control Rod Position Measurement with Helix-Electrode Capacitance Sensor in Nuclear Heating Reactor

Review on Sensors to Measure Control Rod Position for Nuclear Reactor

Static performance of capacitance control rod position sensor: A review

Static Calibration Experiments of Capacitance Control Rod Position Measurement Sensor

Built-in Capacitance Sensor for Control Rod Position Measurement in NHR-200 with PEEK Material

Mechanism Model for Effect of Eccentricity on Capacitive Control Rod Position Indicators

Development of three methods for control rod position monitoring based on fixed in-core neutron detectors

Study on Static Characteristics of Array Electrode Capacitance Control Rod Position Measurement Sensor

Research on Static Characteristics of High Precision Capacitance Rod Position Measurement Sensor

Inductance transducer coded by coils and armatures for control rod position

Study on self-encoding control rod position detector

A Novel Continuously Adjustable Magnetic-valve Controllable Reactor and Its Modeling

Combination Coding Control Rod Position-Indicating System

Study on Gray Code Control Rod Position Indicator

Analysis on the Influence of Protection Electrodes on the Capacitance Control Rod Position Sensor

Research on Eccentricity Performance of Capacitance Rod Position Measurement Sensor for Measuring Non-Metallic Rod