Abstract:A reactor is an important piece of equipment used for reactive power compensation in power system and has a significant impact on the safe operation of power system. Thermal behavior is one of the main causes of reactor failures. For an accurate analysis of the thermal behavior of reactors, electromagnetic–thermal–fluid multi-physics coupling modeling is chosen. However, there is a huge difference in size between the overall structure of the reactor and its insulating material, which makes it difficult to perform mesh generation, resulting in dense mesh and significantly increased solution degrees of freedom, thus making the solution of the reactor’s multi-physics field model very time-consuming. To address this, this paper proposes a simplified processing method to accelerate the solution calculation of the reactor’s multi-physics model. This method calculates the equivalent turns of each encapsulate with parallel coils in the reactor, simplifying the encapsulate into a single-layer coil, thereby greatly reducing the division and solution degrees of freedom of the multi-physics model, and thus accelerating the simulation calculation. Taking a BKDCKL-20000/35 dry-type air-core shunt reactor as an example, the outer diameter of the coil is nearly 12,000 times bigger than the coil insulation, which is a huge size difference. Both refined models and simplified models are established. Compared to the simulation results of the detailed model, the simplified model demonstrates good accuracy; the maximum relative error of temperature is just 2.19%. Meanwhile, the computational time of the simplified model is reduced by 35.7%, which shows promising effectiveness and significant potential for applying the optimization design and operation prediction of dry-type air-core shunt reactors for enhanced thermal performance.

A Hybrid Data Assimilation and Dynamic Mode Decomposition Approach for Xenon Dynamic Prediction of Nuclear Reactor Cores

Mode decomposition of core dynamics transients using higher-order DMD method

A Novel Transformer-Based Method for Predicting Air Absorbed Dose Rates in Nuclear Radiation Environmental Monitoring.

A Hybrid Data-Driven Multi-Stage Deep Learning Framework for Enhanced Nuclear Reactor Power Prediction

Reactor Core Physics Simulation Method for Htr

Dynamic Modeling of a HeXe-Cooled Mobile Nuclear Reactor with Closed Brayton Cycle

Simultaneous Approach for Simulation of A High-Temperature Gas-Cooled Reactor

A Simulation Method for Nuclear Power Plant with High-Temperature Gas-Cooled Reactor

Validation of prediction capability of operating space for plasma initiation in MAST-U

Human-cyber-physical System for Operation in Nuclear Reactor Possessing Asymmetric Multi-Task Learning-Based Predicting Framework

A Nodal Dynamic Model For Control System Simulation Of The Htr-Pm Reactor Core

Transient multi-physics coupling analysis of the Xi'an Pulsed Reactor under pulsed condition

Dynamic Mode Decomposition for data-driven analysis and reduced-order modelling of ExB plasmas: II. dynamics forecasting

Coupled Monte Carlo and Thermal-Hydraulics Modeling for the Three-Dimensional Steady-State Analysis of the Xi'an Pulsed Reactor

Physics-Informed Multi-Stage Deep Learning Framework Development for Digital Twin-Centred State-Based Reactor Power Prediction

On-line monitoring the incore power distribution by using excore ion-chambers

A nodal dynamic model for control system design and simulation of an MHTGR core

Thermal Simulation and Analysis of Dry-Type Air-Core Reactors Based on Multi-Physics Coupling

Dynamic simulation of a space lithium-cooled reactor system coupled with a He–Xe closed Brayton cycle

Prediction method for thermal-hydraulic parameters of nuclear reactor system based on deep learning algorithm

Multivariable modeling and nonlinear coordination control of nuclear reactor cores with/without xenon oscillation using H-infinity loop shaping approach