Abstract:Core power distribution monitoring in operating power reactors is very important in core surveillance, the 3-D power distribution is one of the basic operation parameters which can determine many other important parameters used to evaluate the operation condition of reactor and the safe margin. Many kinds of on-line monitoring systems, such as BEACON [1] and SCOMS [2], have been developed to estimate in-core power distributions using fixed in-core detectors. In order to get the reliability of the estimated power distribution, the uncertainty analysis procedure of the monitoring system is needed. The uncertainty analysis method [ 1 ] of BEACON system includes a statistical simulation of various core state conditions, power distributions and detector behavior based on the measurement variability. A number of ‘true’ and ‘predicted’ core model pairs are selected to provide the uncertainty analysis with a bounding set of differences that could be encountered between the BEACON core monitor model and plant conditions under normal and off-normal conditions. The uncertainty analysis method used in SCOMS system [2] get the overall uncertainty from the uncertainties of the input parameters. Individual uncertainties of input variables are randomly sampled within the range and then added to the original value. In this study, a new uncertainty analysis method for core power distribution monitoring system SMROMS (Small Modular Reactor On-line Monitoring System) was discussed. SMROMS uses in-core self powered neutron detectors (SPNDs) to monitor the power distribution continuously. This method is different from two methods mentioned above, because the calculation uncertainty and measurement uncertainty are considered separately. A rod controlled small modular reactor developed by Nuclear Power Institute of China, i.e. ACP100-K, was selected as a study case. The 3DCC [3] (3D Coupling Coefficients) power distribution reconstruction method was implemented in SMROMS.

Study on the Relationship between Ex-core Detector Readings and In-core Power Distribution

Calculation of Ex-Core Detector 3D Space Response Function via Monte Carlo Adjoint Transport Method

Calculation and Characteristic Analysis of Ex-Core Detector Spatial Response Function for High Temperature Gas-Cooled Reactor

On-line monitoring the incore power distribution by using excore ion-chambers

Study on response of ex-core detector based on Monte Carlo particle orientation

Analysis the Response Function of the HTR Ex-core Neutron Detectors in Different Core Status

Two spatial statistical algorithms for core power distribution reconstruction

Research of core power distribution reconstruction method based on cross section deviation

The possibility to online reconstruct the htr in-core power distribution

Uncertainty Analysis of Core Power Distribution Monitoring System SMROMS

Analysis of Readings of Background Cores of In-Reactor Detectors

Use readings of thermocouples to reconstruct the power distribution of HTR-PM

A Monte-Carlo Simulation Method For The Study Of Self-Powered Neutron Detectors

A Hybrid Data Assimilation and Dynamic Mode Decomposition Approach for Xenon Dynamic Prediction of Nuclear Reactor Cores

Improved Harmonics Synthesis Method and Its Application in Reconstructing Power Distribution of HTR-PM

Reactor Core Physics Simulation Method for Htr

A Simulation Method for Nuclear Power Plant with High-Temperature Gas-Cooled Reactor

Application of Least Square Support Vector Machine in Core Power Distribution Reconstruction

Theoretical And Experimental Study On Natural Circulation Relevant To Nuclear Heating Reactor

Real-time simulations to enhance distributed on-line monitoring and fault detection in Pressurized Water Reactors

Application of new axial power distribution synthesis method using in-core detector signal in digital core protection system