Abstract:A new optical capillary cell was constructed from square cross-sectioned fused silica-capillary tubing (300 µm × 300 µm with cavities of 100 µm × 100 µm or 50 µm × 50 µm) and a high-pressure valve that allows room-temperature studies of fluids at pressures up to 100 MPa. This capillary cell has the advantage of very precise study of fluid systems under 100 MPa pressures, not easily done in diamond anvil cells. Several key features of this cell include: (1) The ability to directly load sample fluids and monitor pressure during investigation, (2) The lack of optical distortion, (3) The small cell volume suitable for samples of limited supply (e.g. commercially available gas mixtures), (4) The high pressures that can be achieved, (5) The high-magnification, high-numerical aperture objective lens (e.g. 100×) with a short working distance that can be used due to the thin wall of the capillary tube, and (6) The heating–cooling stage or a circulating fluid bath that can be added, allowing for investigations at temperatures other than room temperature, particularly suitable for studies of gas hydrates. Raman spectra have been collected from the cell at room temperature for methane, ethane, propane, n-butane, and for two gas mixtures containing up to nine components as a function of pressure up to 70 MPa. The spectra document the shift in Raman bands with pressure as well as constrain the detection limits for various gas species in the mixtures. Preliminary experiments on the diffusion of methane in water were conducted by monitoring the concentration of dissolved methane in water as a function of time and distance from the vapor–water boundary, immediately after perturbation of an equilibrium state induced by a sudden incremental change in methane pressure.

A Closed Sample Cell and Co-used Furnace Designed for Micro-Raman Spectra Study on Volatile Melts

A Nearly Zero Temperature Gradient Furnace System for High Pressure Multi-Anvil Experiments

A Rapid-Quench Technique for Multi-Anvil High-Pressure-temperature Experiments.

High-Temperature and High-Pressure Cubic Zirconia Anvil Cell for Raman Spectroscopy

A Furnace to 1200 K for in Situ Heating X-Ray Diffraction, Small Angle X-Ray Scattering, and X-Ray Absorption Fine Structure Experiments

A small sealed Ta crucible for thermal analysis of volatile metallic samples

A novel method for experiments in a one-atmosphere box furnace

Furnace for Inelastic X-Ray Scattering from Liquids to 1600C

In situ high pressure-temperature Raman spectroscopy technique with laser-heated diamond anvil cells

Development of a microfurnace dedicated to in situ scanning electron microscope observation up to 1300 °C. II. Study of the thermal response of samples

A multi-purpose high-pressure and high temperature gas-flow cell for operando optical Raman spectroscopy

In-situ Raman Microspectroscopy Study of Fluids in the H2O-CO2 System in Optical Fused Silica Capillary

In Situ Raman Spectroscopy with Laser-Heated Diamond Anvil Cells

A reaction cell with sample laser heating for in situ soft X-ray absorption spectroscopy studies under environmental conditions.

Performance and characteristics of a high pressure, high temperature capillary cell with facile construction for operando x-ray absorption spectroscopy

High-density, High-Temperature Alkali Vapor Cell.

A new optical capillary cell for spectroscopic studies of geologic fluids at pressures up to 100 MPa

The RAPTR furnace: a rapid heating and cooling sample furnace for in situ X‐ray scattering studies of temperature‐induced reactions

In Situ High-Temperature Raman Spectroscopy via a Remote Fiber-Optic Raman Probe

An Ultra-High Temperature Furnace for Temperature Determination by Neutron Resonance Spectroscopy