Abstract:Large volume cubic press is one of the most popular high pressure devices which can produce pressures up to about 7 GPa. It is well known experimentally that the enhancing of the maximum pressure generated in the large volume cubic press has attracted wide attention among scientists and engineers because the higher pressure is capable of synthesizing some materials with interesting properties. In the large volume cubic press, pyrophyllite is typically used as a pressure-transmitting medium. A specimen immersed in such a solid experiences a generalized stress state. The pressure distribution in pyrophyllite is an important parameter for characterizing the sample environment and designing the experiments at high pressure. There is a need for the quantitative measurement of pressure gradients in the pyrophyllite pressure medium, so that the accurate experimental data under high pressure can be obtained. In the large volume cubic apparatus (68 MN), we put a circuit into the high pressure cubic cell, so that the pressures at various positions can be measured by using the phase transitions in Bi, Tl and Ba. In the present work, the relationship between the total press load and the press load allocated to the anvil face, and the relationship between the total press load and the press load allocated to gaskets are established at room temperature. The results show that with the increase of the total press load, the load allocated to the gaskets is increased sharply, while the curve of load allocated to the anvil face versus total press load reaches a plateau, which results in the cell pressure reaching upper limit when the cell pressure reaches up to about 5 GPa. According to the experimental results, the stress state of the cubic cell under high pressure is analyzed and the reason why the pressure generated in the large volume cubic chamber is difficult to exceed 7 GPa is explained. Based on the geometrical structure of the cubic cell, the scheme to increase the upper pressure limit for cubic cell by using the material with high bulk modulus as the pressure transmitting medium and the material with low bulk modulus as the gasket, is proposed. Additionally, the method of calculating the pressure values at different positions along the axis of symmetry in the cubic cell is given through the quantitative calibration of the pressure gradient in the axial direction of the cubic cell. This method can provide more accurate pressure data for high pressure experiments.

High-Temperature and High-Pressure Cubic Zirconia Anvil Cell for Raman Spectroscopy

Raman Spectra Based Pressure Calibration of the Non-Gauge Sapphire Anvil Cell at High Temperature and High Pressure

Sapphire-ruby single-crystal fibre for application in high temperature optical fibre thermometers: Studies at temperatures up to 1500 °C

Force Analysis and Pressure Quantitative Measurement for the High Pressure Cubic Cell

Applications of Moissanite Anvil Cell for Raman Spectroscopy under High-Temperature and High-Pressure

Calibration of Pressure to 35 Gpa for the Cubic Press Using the Diamond-Cemented Carbide Compound Anvil

Raman Scattering System for A Laser Heated Diamond Anvil Cell

In situ high pressure-temperature Raman spectroscopy technique with laser-heated diamond anvil cells

Sample heating above 1400 K in a diamond anvil cell

In Situ Raman Spectroscopy with Laser-Heated Diamond Anvil Cells

A Closed Sample Cell and Co-used Furnace Designed for Micro-Raman Spectra Study on Volatile Melts

Technical Note: A High-Temperature, High-Pressure Window for in Situ Optical Observation and Raman Detection

A Zirconia Single-Crystal Fibre-Optic Sensor for Contact Measurement of Temperatures above 2000 °C

High-Temperature Fiber Optic Cubic-Zirconia Pressure Sensor

High-pressure and high-temperature Raman study of cinnabar

Sapphire Tube Waveguide As A Potential Basis for High Temperature Raman Spectroscopy

A multi-purpose high-pressure and high temperature gas-flow cell for operando optical Raman spectroscopy

A new optical capillary cell for spectroscopic studies of geologic fluids at pressures up to 100 MPa

Research on Using Raman Spectra of Carborundum Anvil as Pressure Sensor at Pressure of 0.1～3000 MPa

Large-volume Cubic Press Produces High Temperatures above 4000 Kelvin for Study of the Refractory Materials at Pressures.

The moissanite anvil cell: a new tool for high-pressure research