Abstract:In the present study, we analyse the mechanical structure for the two-stage anvil cell, and design the two-stage high pressure cell using diamond-cemented carbide compound as anvil-material. The diamond-cemented carbide compound material is synthesized using the 6 × 2500 ton cubic press in our laboratory. We sinter diamond/Co layer (Φ30 mm×10 mm) on a WC-cobalt substrate (Φ30 mm×13 mm) at high pressures and temperatures, then, we obtain the cubic anvils from the sintered cylindrical chunks by wire-electrode cutting. The diamond-cemented carbide compound anvil has three advantages over the traditional sintered diamond anvil:first, a scaled-up version of the sintered diamond anvil could be obtained by sintering the diamond/Co layer on a WC-cobalt substrate;second, the diamond-cemented carbide compound anvil is machined easily compared with the sintered diamond anvil;and third, the experimental cost using the diamond-cemented carbide compound anvils is much lower than using the sintered diamond anvil. Using the diamond-cemented carbide compound anvil, we design the two-stage 5.5/1.5 (octahedral edge-length/anvil truncation edge-length, in millimetre) assemble. Pressure calibration at room temperature is performed for the 5.5/1.5 assemble using the phase transitions of Zr (α-ω, 7.96 GPa;ω-β, 34.5 GPa) under high pressures. The pressure range of the two-stage apparatus besed on hinge-type cubic press is extended from 20 GPa to about 35 GPa using the 5.5/1.5 assemble. The pressure calibration for the two-stage apparatus using diamond-cemented carbide compound anvil is ongoing in our laboratory. We believe that the pressures above 50 GPa could be achieved using these anvils.

The moissanite anvil cell: a new tool for high-pressure research

Moissanite: A Window for High-Pressure Experiments

The Gem Anvil Cell: High-Pressure Behaviour of Diamond and Related Materials

Large volume high-pressure cell with supported moissanite anvils

Calibration of Pressure to 35 Gpa for the Cubic Press Using the Diamond-Cemented Carbide Compound Anvil

A miniature multi-anvil apparatus using diamond as anvils—MDAC: Multi-axis diamond anvil cell

Diamond Anvil Cell Behavior Up to 4 Mbar

Moissanite (Sic) As Windows And Anvils For High-Pressure Infrared Spectroscopy

Applications of Moissanite Anvil Cell for Raman Spectroscopy under High-Temperature and High-Pressure

Raman Spectra Based Pressure Calibration of the Non-Gauge Sapphire Anvil Cell at High Temperature and High Pressure

X-Ray Diffraction And Laser Heating: Application Of A Moissanite Anvil Cell

Ultrahigh-pressure Experiment with a Motor-Driven Diamond Anvil Cell.

Extreme static compression of carbon to terapascal pressures

Unexpected Strength of Noble Gas Solids in Diamond Anvil Cells

Exploring toroidal anvil profiles for larger sample volumes above 4 Mbar

Composite Chemical Vapor Deposition Diamond Anvils for High-Pressure/high-temperature Experiments

Study of Diamond Anvil Cell for In-Situ High-temperature and High-pressure Spectrum

Recent Design of Ultrahigh-Pressure Diamond Cell

New diamond cell for single-crystal x-ray diffraction

Energy dispersive x-ray diffraction of micro-crystals at ultrahigh pressures

In situ measurement techniques using diamond anvil cell at high pressure–temperature conditions: A review