Abstract:In the present study, we analyse the mechanical structure for the two-stage anvil cell, and design the two-stage high pressure cell using diamond-cemented carbide compound as anvil-material. The diamond-cemented carbide compound material is synthesized using the 6 × 2500 ton cubic press in our laboratory. We sinter diamond/Co layer (Φ30 mm×10 mm) on a WC-cobalt substrate (Φ30 mm×13 mm) at high pressures and temperatures, then, we obtain the cubic anvils from the sintered cylindrical chunks by wire-electrode cutting. The diamond-cemented carbide compound anvil has three advantages over the traditional sintered diamond anvil:first, a scaled-up version of the sintered diamond anvil could be obtained by sintering the diamond/Co layer on a WC-cobalt substrate;second, the diamond-cemented carbide compound anvil is machined easily compared with the sintered diamond anvil;and third, the experimental cost using the diamond-cemented carbide compound anvils is much lower than using the sintered diamond anvil. Using the diamond-cemented carbide compound anvil, we design the two-stage 5.5/1.5 (octahedral edge-length/anvil truncation edge-length, in millimetre) assemble. Pressure calibration at room temperature is performed for the 5.5/1.5 assemble using the phase transitions of Zr (α-ω, 7.96 GPa;ω-β, 34.5 GPa) under high pressures. The pressure range of the two-stage apparatus besed on hinge-type cubic press is extended from 20 GPa to about 35 GPa using the 5.5/1.5 assemble. The pressure calibration for the two-stage apparatus using diamond-cemented carbide compound anvil is ongoing in our laboratory. We believe that the pressures above 50 GPa could be achieved using these anvils.

The Gem Anvil Cell: High-Pressure Behaviour of Diamond and Related Materials

The moissanite anvil cell: a new tool for high-pressure research

Moissanite: A Window for High-Pressure Experiments

Raman Spectra Based Pressure Calibration of the Non-Gauge Sapphire Anvil Cell at High Temperature and High Pressure

Calibration of Pressure to 35 Gpa for the Cubic Press Using the Diamond-Cemented Carbide Compound Anvil

Study of Diamond Anvil Cell for In-Situ High-temperature and High-pressure Spectrum

Applications of Moissanite Anvil Cell for Raman Spectroscopy under High-Temperature and High-Pressure

Measurement of Stress in Diamond Anvils with Micro‐raman Spectroscopy

A Diamond Gasket for the Laser-Heated Diamond Anvil Cell

Moissanite (Sic) As Windows And Anvils For High-Pressure Infrared Spectroscopy

Pressure Distribution in the Diamond Anvil Press and the Shear Strenght of Fayalite

X-Ray Diffraction And Laser Heating: Application Of A Moissanite Anvil Cell

In situ measurement techniques using diamond anvil cell at high pressure–temperature conditions: A review

A Raman spectroscopic study of phengite under high pressure

Diamond Anvil Cell Behavior Up to 4 Mbar

Absolute Pressure Measurements and Analysis of Diamonds Subjected to Maximum Static Pressures of 1.3-1.7 Mbar

A Hydrothermal Anvil Made of Graphene Nanobubbles on Diamond

Thermal conductance of metal–diamond interfaces at high pressure

Large volume high-pressure cell with supported moissanite anvils

Generation of Static Pressures above 2.5 Megabars in A Diamond-Anvil Pressure Cell

Thickness measurement of sample in diamond anvil cell