Abstract:Commercially pure titanium specimens are subjected to three different treatments, and their bioactivity are evaluated by immersing the specimens in a simulated body fluid (SBF, Kokubo's recipe) for various periods up to 7 days, with particular attention being paid to the differences in apatite deposition between surfaces open to SBF and surfaces in contact with the container's bottom. The treatment with a H(2)O(2)/HCl solution at 80 degrees C for 30 min followed by heating at 400 degrees C for 1 h produces an anatase titania gel layer on the specimen surface. This gel layer deposits apatite both on the contact and on open surfaces, and apatite deposition ability does not change with pre-staking in distilled water. The treatment with a NaOH solution at 60 degrees C for 3 days produces a sodium titanate gel layer. This gel layer can deposit apatite only on the contact surface, and the apatite deposition ability is completely lost after 1 day of pre-staking in distilled water. It is concluded, therefore, that the bioactivity of the titania gel originates from the favorable structure of the gel itself while the bioactivity of the sodium titanate gel depends heavily on ion release from the gel. The third treatment, a simple heat treatment at 400 degrees C for 1 h, produces a dense (not porous) oxide layer on the specimen surface. The specimens can deposit apatite on the contact surface after only 3 days of staking in SBF, but they cannot deposit apatite on the open surface for up to 2 months of staking. The implications of such apatite deposition behavior have been discussed in relation to the environments of titanium implants in bone as well as to the methodology of the SBF staking experiment.

Bioactive Titanate Nanomesh Layer on the Ti-based Bulk Metallic Glass by Hydrothermal–electrochemical Technique

Biomimetic Deposition of Apatite on Electrochemically Oxidized Titanium Substrates

Bioactive Titania-Gel Layers Formed by Chemical Treatment of Ti Substrate with a H2O2/HCl Solution.

A Comparative Study of in Vitro Apatite Deposition on Heat-, H(2)O(2)-, and NaOH-treated Titanium Surfaces.

Solution Process for Synthesizing Bioactive Nano-Mesh Layer on Ti-Based Bulk Metallic Glasses

Bioactive treatment of titanium surface using a H2O2/HCl solution

Improvement of Bioactivity of H(2)O(2)/TaCl(5)-treated Titanium after Subsequent Heat Treatments.

Bioactivity of Metallic Biomaterials with Anatase Layers Deposited in Acidic Titanium Tetrafluoride Solution

Bio-activation of Ni-free Zr-based bulk metallic glass by surface modification

Bioactive macroporous titanium surface layer on titanium substrate

Manganese-containing Bioactive Glass Enhances Osteogenic Activity of TiO2 Nanotube Arrays

Nanostructured positively charged bioactive TiO2 layer formed on Ti metal by NaOH, acid and heat treatments

Low-Temperature Deposition of Bioactive Crystalline Titania Films: Effects of Tantalum

Optimization of bioactivity and antibacterial properties of porous Ti-based bulk metallic glass through chemical treatment

High Bone-Like Apatite-Forming Ability of Mesoporous Titania Films

BIOCERAMIC COATINGS ON TITANIUM SURFACES

Growth of Novel Ceramic Layers on Metals via Chemical and Heat Treatments for Inducing Various Biological Functions

Surface potential change in bioactive titanium metal during the process of apatite formation in simulated body fluid

Fabrication and Characteristics of Bioactive Sodium Titanate/titania Graded Film on NiTi Shape Memory Alloy.

Nanocrystalline Titanium To Mesoporous Anatase With High Bioactivity

Stress Corrosion Cracking and Bioactivity of Ti-based Bulk Metallic Glass