Abstract:Ti‐based bulk metallic glasses are envisioned for human implant applications. Yet, while their elevated Cu content is essential for a high glass‐forming ability, it poses biocompatibility issues, necessitating a reduction in near‐surface regions. To address this, surface treatments that simultaneously generate protective and bioactive states, based on nanostructured Ti‐ and Zr‐oxide layers are proposed. We define an electrochemical pseudo‐dealloying process using the bulk glass‐forming Ti47Cu38Fe2.5Zr7.5Sn2Si1Ag2 alloy. Melt‐spun ribbons are immersed in a hot concentrated nitric acid solution, monitoring the anodic polarization behavior. From the current density transient measurements, together with surface studies (Field‐Emission Scanning Electron Microscopy, Transmission Electron Microscopy and Auger Electron Spectroscopy), the surface reactions are described. This nanostructuring process is divided into three stages: passivation, Cu dissolution and slow oxide growth, leading to homogenous nanoporous and ligament structures. By tuning the applied potential, the pore and ligament sizes, and thickness values are adjusted. According to X‐Ray Photoelectron Spectroscopy, these nanoporous structures are Ti‐ and Zr‐oxides rich in hydrous and non‐hydrous states. In a simulated physiological solution, for those treated glassy alloy samples, complete suppression of chloride‐induced pitting corrosion in the anodic regime of water stability is achieved. This high corrosion resistance is similar to that of clinically used cp‐Ti. This article is protected by copyright. All rights reserved.

Stress Corrosion Cracking and Bioactivity of Ti-based Bulk Metallic Glass

Enhanced Mechanical Properties, Corrosion Behavior and Bioactivity of Ti-based Bulk Metallic Glasses with Minor Addition Elements

Corrosion Behaviour of Porous Ni-free Ti-based Bulk Metallic Glass Produced by Spark Plasma Sintering in Hanks' Solution

Optimization of bioactivity and antibacterial properties of porous Ti-based bulk metallic glass through chemical treatment

Surface Modification and Biocompatibility of Ni-free Zr-based Bulk Metallic Glass

New Ti-based Ti–Cu–Zr–Fe–Sn–Si–Ag Bulk Metallic Glass for Biomedical Applications

Stress-induced Structural Change During Superplastic Deformation of Bulk Zr-based Metallic Glass

Structural transformation and rheological processes in bulk metallic glass Zr41Ti14Cu12.5Ni10Be22.5

Ti Microalloying Effect on Corrosion Resistance and Thermal Stability of CuZr-based Bulk Metallic Glasses

Porous Ti-based bulk metallic glass with excellent mechanical properties and good biocompatibility

Formation and properties of biocompatible Ti-based bulk metallic glasses in the Ti–Cu–Zr–Fe–Sn–Si–Ag system

Investigation of Deformation Behavior of Zr-Ti-Ni-Cu-Be Bulk Metallic Glass Containing Nanocrystals

Electrochemical surface nanostructuring of Ti47Cu38Fe2.5Zr7.5Sn2Si1Ag2 metallic glass for improved pitting corrosion resistance

The influence of porous structure on the corrosion behavior and biocompatibility of bulk Ti-based metallic glass

A Ni- and Cu-free Zr-based Bulk Metallic Glass with Excellent Resistance to Stress Corrosion Cracking in Simulated Body Fluids

Novel Corrosion Behaviours of the Annealing and Cryogenic Thermal Cycling Treated Ti-based Metallic Glasses

Recent Progress in Ti-Based Metallic Glasses for Application As Biomaterials

Bio-activation of Ni-free Zr-based bulk metallic glass by surface modification

Enhanced wear, corrosion, and corrosive-wear resistance of the biocompatible Ti-based bulk metallic glass by oxidation treatment

Deformation behavior, corrosion resistance, and cytotoxicity of Ni-free Zr-based bulk metallic glasses

Martensitic Transformation and Plastic Deformation of TiCuNiZr-Based Bulk Metallic Glass Composites