Abstract:Herein, Ni-W alloy matrixes were successfully fortified with two salen-type Schiff bases 1-((E)-(2-((E)-(2-hydroxynaphthalen-1-yl)methyleneamino)phenylimino)methyl)naphthalen-2-ol (OPD) and 1-((E)-(2-((E)-(2- hydroxynaphthalen-1- yl)methyleneamino)-phenylimino)methyl)naphthalen-2-ol (PPD) as additives, of similar molecular structure but varied isomeric spacers, using a facile direct current electrodeposition technique. The resulting coatings from the additive-introduced reaction system were termed as Ni-W/OPD and Ni-W/PPD throughout the study. The deterioration process (0.5 M H2SO4), surface properties, elemental composition, functional groups, and structurs of the resultant coatings were analyzed by means of Tafel and electrochemical impedance spectroscopy, field emission scanning electron microscopy (FESEM), X-ray photoelectron spectroscopy, atomic force microscopy, energy dispersive X-ray spectroscopy, Fourier transform infrared spectroscopy, and X-ray diffraction (XRD). The bare Ni-W alloy deposition resulted in a loose microstructure with higher porosity density (12.2%), while that of additive-doped plating electrolytes resulted in a compact and dense microstructure with lesser porosity density (6.3%) and minimal porosity density (3.7%) as for Ni-W/OPD and Ni-W/PPD alloy coatings, respectively. Improved corrosion parameters presented superior corrosion characteristics of Ni-W alloy coatings from an additive (PPD)-induced bath, i.e., Ni-W/PPD. Synergetic adsorption of imine groups (N atoms), hydroxyl groups (O atoms), and aromatic electron clouds and reduction in steric hindrance produced by a larger isomeric spacer strengthened the surface adsorption of additives, yielding a fine nanocrystalline Ni-W coating with reduced porosity and well-refined grains, implying the outstanding shielding effect. Results of FESEM, AFM, and XRD analyses revealed a complete cohesion between two neighboring islands, resulting in a fine planar structure with minimal coating defects for Ni-W/PPD coatings, authenticating the corrosion parameters.

Effect of Sodium Hypophosphite on the Structure and Properties of Electrodeposited Ni-W-P Alloys

Electrodeposition of Ni-W-P alloy

Preparation and Properties of Textured Ni–W Coatings Electrodeposited on the Steel Surface from a Pyrophosphate Bath

Excellent Properties of Ni-15 wt.% W Alloy Electrodeposited from a Low-Temperature Pyrophosphate System

Effect of Electrochemical Bath Composition on the Preparation of Ni-W-Fe-P Amorphous Alloy

The Effect of Tungsten Additive on the Surface Characteristics of Amorphous Ni–P Alloy

Effect of Phosphorus Content on Local Structures of NiP Amorphous Alloys

Effect of Tungsten on Microstructures of Annealed Electrodeposited Ni-W Alloy and Its Corrosion Resistance

Electrochemical Synthesis and Characterization of Ni–P Alloy Coatings from Eutectic–Based Ionic Liquid

Influence of Positional Isomeric Spacers of Naphthalene Derivatives on Ni–W Alloy Electrodeposition: Electrochemical and Microstructural Properties

Effects of Ligands on Electroless Ni–P Alloy Plating from Alkaline Citrate–ammonia Solution

Electrodeposition of nanocrystalline Ni-Mo alloys in pyrophosphate baths

Study on Electroless Plating Ni-W-P Ternary Alloy with High Tungsten from Compound Complexant Bath

Electroless Deposition of Ni-Co-P Deposit on NdFeB Permanent Magnets and Its Corrosion Resistance Property

The Effects of Na2WO4 Concentration on the Properties of Microarc Oxidation Coatings on Aluminum Alloy

Microstructure and wear properties of crystalline W alloy coatings prepared by electrodeposition

Studies of electroless Ni–Co–P ternary alloy on glass fibers

The effect of solid solution W additions on the mechanical properties of nanocrystalline Ni

Effect of Na2 WO4 on properties of micro-arc oxidation ceramic coatings on aluminum alloy

Effects of Surfactants in an Electroless Nickel-Plating Bath on the Properties of Ni−P Alloy Deposits

Influence of W content on microstructure and surface morphology of hard Ni-W films fabricated by magnetron co-sputtering