Abstract:To overcome the practical issues existed in RRAMs application, complementary resistive switching (CRS) and self-compliance effect are investigated to alleviate sneak current issue and avoid external compliance current (I-comp), respectively. It is remarkable that the two resistive switching (RS) behaviors are attempted to achieve in the same system of Pt/HfO2(7.5-x)/Ti(2x)/HfO2(7.5-x)/Pt (x = 0, 2.5, 3.5 nm) device fabricated by magnetron sputtering, i.e., multi-mode resistive switching behaviors are modulated by varying Ti interlayer thickness and operation scheme, such as initial I-comp and applied voltage during reset switching. As indicated by the results, typical bipolar resistive switching (BRS) and CRS behaviors exhibit in Pt/HfO2(similar to 4 nm)/Ti(similar to 7 nm)/HfO2(similar to 4 nm)/Pt devices, and self-compliance effect appears in Pt/HfO2(similar to 5 nm)/Ti(similar to 5 nm)/HfO2(similar to 5 nm)/Pt devices. After investigated the conductive mechanisms, it is proposed adopting conceivable switching mechanism associated with the formation of oxygen vacancy (V-o) and metallic conduction filament (CF) to understand CRS and self-compliance effect. The exploration of multi-mode RS behaviors paves the way to improve the flexibility and convenience of RRAMs in actual application. (c) 2016 Elsevier B.V. All rights reserved.

Effects of the Compliance Current on the Resistive Switching Behavior of TiO2 Thin Films

The Effect of Current Compliance on the Resistive Switching Behaviors in TiN/ZrO<sub>2</sub>/Pt Memory Device

Uniform Bipolar Resistive Switching Properties with Self-Compliance Effect of Pt/TiO2/p-Si Devices

Comparisons of Switching Characteristics Between Ti/Al2O3/Pt and TiN/Al2O3/Pt RRAM Devices with Various Compliance Currents

In Situ Observation of Compliance-Current Overshoot and Its Effect on Resistive Switching

Stabilizing Resistive Switching Performances of TiN/MgZnO/ZnO/Pt Heterostructure Memory Devices by Programming the Proper Compliance Current

Electrode-Dependent Resistive Switching Characteristics of Sr(Ti,Sn)O-3 Thin Films

Resistive switching and synaptic learning performance of a TiO2 thin film based device prepared by sol–gel and spin coating techniques

Multi-mode Resistive Switching Behaviors Induced by Modifying Ti Interlayer Thickness and Operation Scheme

Impact of Ultrathin Al2O3 Interlayers on Resistive Switching in TiOx Thin Films Deposited by Atomic Layer Deposition

Resistive switching characteristics of Ti/ZrO2/Pt RRAM device

Electrode Effect on Resistive Switching of Ti-added Amorphous SiOx Films

Influences Of Interface States On Resistive Switching Properties Of Tiox With Different Electrodes

Improvement of resistive switching characteristics in ZrO2 film by embedding a thin TiOx layer.

Compliance Current Induced Non-Reversible Transition from Unipolar to Bipolar Resistive Switching in A Cu/Taox/Pt Structure

Compliance-Current Manipulation of Dual-Filament Switching in a Ta/Ta<sub>2</sub>O<sub>5</sub>/In-Sn-O Structure with an Ultralow Power Consumption

Structural characteristics and resistive switching properties of thermally prepared TiO2 thin films

Compliance Current Effect on Switching Behavior of Hafnium Oxide Based RRAM

EFFECTS OFTiOxINTERLAYER ON RESISTANCE SWITCHING OFPt/TiOx/ZnO/n+-SiSTRUCTURES

Complementary Resistive Switching Behavior Induced by Varying Forming Current Compliance in Resistance Random Access Memory

The Resistive Switching in TiO2 Films Studied by Conductive Atomic Force Microscopy and Kelvin Probe Force Microscopy