Abstract:Silicon dioxide (SiO 2 ) is formed via a combination of silicon and oxygen, which are the most abundant elements on Earth. It possesses excellent heat and chemical resistance and can be developed into various types of functional materials. In particular, spherical SiO 2 is extensively utilized in the pre-impregnated materials of printed circuit boards (PCBs) and as a filler in cosmetics. Among the methods used for manufacturing spherical SiO 2 powders, ultrasonic spray pyrolysis (USP) involves the generation of droplets by subjecting a precursor solution to ultrasonic waves. These droplets then undergo a thermal decomposition, resulting in the formation of the final powders. In this study, a low-priced commercial sodium silicate (water glass, Na 2 O 3 Si) was employed as the starting material, and a high-purity colloidal nano-SiO 2 sol was prepared via an ion-exchange resin method. The effects of the rheological properties (dispersion and viscosity), colloidal nano-SiO 2 size, and concentration of the prepared high-purity nano-SiO 2 sol on the shape of the spherical SiO 2 powders synthesized through USP were observed through SEM, PSA, and XRD. The results confirmed that the changes in the colloidal nano-SiO 2 size and surface tension, due to the addition of ethanol to the high-purity nano-SiO 2 sol, had little effect on the physical properties, such as particle size, standard deviation, and roundness of the SiO 2 powders synthesized by USP (USP-SiO 2 ). Moreover, dispersibility alterations were achieved through pH control. Furthermore, concentration of the nano-SiO 2 sol significantly affected the particle size and monodispersity of the final USP-SiO 2 powders.

Preparation of ultrafine SiO2 with high surface area by the chemical precipitation method

Synthesis, Characterization and Application of Submicron ZrSiO4 Powder Via Sol-Gel-microemulsion-hydrothermal Method

Preparation of highly dispersed nanosilica from rice husk by aprecipitation method combined with high pressure homogenization

Preparation of Silica Material with High Pore Volume by Precipitation in Membrane Dispersion Reactor

Study on preparation and surface modification of precipitated silica obtained from fly ash

Preparation of Silica Flatting Agent with Large Pore Volume by Using a Micro-sieve Reactor

Preparation of Highly Dispersed Precipitated Nanosilica in a Membrane Dispersion Microreactor

Controllable Preparation of Sio2 Nanoparticles Using A Microfiltration Membrane Dispersion Microreactor

Preparation of nano-silica powder from silica sand via sol-precipitation method

Studies of synthesizing the SiC nanometer powders by chemical vapor reaction

Preparation of Nano-Sio_2 Aqueous Suspension

Preparation of SiO2/attapulgite Nanoparticles and Their Adsorption Properties

The preparation of silica white from fly ash and its characterization

Preparation of nano SiO2/cenosphere composites by chemical precipitation

Effects of Precipitation and Drying Processes on the Synthesis of Silica Materials with A Large-Pore-Volume and Narrow-Pore-Diameter Distribution

Preparation of Highly Dispersed SiO 2 Nanoparticles Using Continuous Gas-Based Impinging Streams

Synthesis of spherical SiO2 powders from water glass and colloidal Sol through ultrasonic spray pyrolysis

Study on the Modification of Superfine Amorphous Silica by Liquid-phase Precipitation Method

Preparation of Zinc Oxide Particles by Surfactant-Assisted Hydrothermal Method

Preparation of Silica by Alkaline-Heating and Precipitation Method from Corn Straw Ash

Experimental Research on Preparation of High Specific Surface Area SiO_2 from Fly Ash