Abstract:Piezoelectric micromachined ultrasound transducers (PMUTs) have gained significant popularity in the field of ultrasound ranging and medical imaging owing to their small size, low power consumption, and affordability. The scar-free "MIS" (micro-hole inter-etch and sealing) process, a novel bulk-silicon manufacturing technique, has been successfully developed for the fabrication of pressure sensors, flow sensors, and accelerometers. In this study, we utilize the MIS process to fabricate cavity diaphragm structures for PMUTs, resulting in the formation of a flat cavity diaphragm structure through anisotropic etching of (111) wafers in a 70 °C tetramethylammonium hydroxide (TMAH) solution. This study investigates the corrosion characteristics of the MIS technology on (111) silicon wafers, arranges micro-pores etched on bulk silicon around the desired cavity structure in a regular pattern, and takes into consideration the distance compensation for lateral corrosion, resulting in a fully connected cavity structure closely approximating an ortho-hexagonal shape. By utilizing a sputtering process to deposit metallic molybdenum as upper and lower electrodes, as well as piezoelectric materials above the cavity structure, we have successfully fabricated aluminum nitride (AlN) piezoelectric ultrasonic transducer arrays of various sizes and structures. The final hexagonal PMUT cells of various sizes that were fabricated achieved a maximum quality factor (Q) of 251 and a displacement sensitivity of 18.49 nm/V across a range of resonant frequencies from 6.28 MHz to 11.99 MHz. This fabrication design facilitates the achievement of IC-compatible and cost-effective mass production of PMUT array devices with high resonance frequencies.

Fabrication of MEMS ZnO Dome-Shaped-diaphragm Transducers for High-Frequency Ultrasonic Imaging

Femtosecond Laser Micromachining of the Mask for Acoustofluidic Device Preparation

Three-dimensional micro electromechanical system piezoelectric ultrasound transducer

Patterned Microstructure Array Fabrication By Using A Novel Standing Surface Acoustic Wave Device

A Novel Method for Fabrication of High-Frequency (> 100 Mhz) Zno Ultrasonic Array Transducers on Silicon Substrates

Fabrication and modeling of piezoelectric transducers for High-Frequency medical imaging

A novel method to fabricate full-kerfed highfrequency (>100 MHz) ultrasonic array transducers

A Self-Aligned Mask-Free Fabrication Process for High-Frequency ZnO Array Transducer

Design And Fabrication Of Piezoelectric Micromachined Ultrasound Transducer (Pmut) With Partially-Etched Zno Film

Piezoelectric Micromachined Ultrasonic Transducers with Micro-Hole Inter-Etch and Sealing Process on (111) Silicon Wafer

Resonant-Typed Microscanners Fabricated By Hybrid Pzt Deposition Process On Soi Wafers

Design and micro-machining fabrication of piezoelectric diaphragm chambers for biomaterial detection

High Sensitivity and High S/N Microphone Achieved by PZT Film with Central-Circle Electrode Design

Micro Acoustic Devices Using Piezoelectric Films

Screen-printed ultrasonic 2-D matrix array transducers for microparticle manipulation

A Novel Method for Fabricating 2-D Array Piezoelectric Micromachined Ultrasonic Transducers for Medical Imaging

Zno-Film/Si-Diaphragm Underwater Ultrasonic Transducers

Design, fabrication and reliability study of piezoelectric ZnO based structure for development of MEMS acoustic sensor

Deep Reactive Ion Etching of PZT Ceramics and PMN-PT Single Crystals for High Frequency Ultrasound Transducers

Fabrication Method of 2-Dimensional Piezoelectric Micromachined Ultrasonic Transducer Arrays

Ultrasonic energy transference based on an MEMS ZnO film array