Abstract:The symmetrical optical waveguide structures are fabricated in Er3+-doped aluminosilicate glass using 800 nm femtosecond laser writing in kHz repetition frequency regime. The impact of writing parameters on the waveguide preparation with a 10× microscope objective in the longitudinal writing scheme was studied in detail. The experimental results show that, under a fixed pulse energy value of 20 μJ, the waveguides can be realized with the scan speed from 20 to 160 μm/s, and with a fixed scan speed value of 160 μm/s, the waveguide can be prepared under an inscription energy range of 5–30 μJ, indicating that the waveguide can be realized in a wide range of writing parameters. The near-field mode intensity image shows that the waveguide region possesses excellent light guiding properties. Based on the refractive index profile reconstruction method, the maximum refractive index increase in the waveguide region is estimated to be about 5.5 × 10–4. The lowest propagation loss of the waveguide was measured to be about 1.51 dB/cm by the waveguide side scattering method. The microfluorescence spectra show that the gain characteristics of the waveguide region are well maintained after laser processing. This work shows that the fabrication of embedded optical waveguides using ultrashort pulse laser in Er3+-doped aluminosilicate glass has strong feasibility and great potential to create active gain devices in the field of integrated photonics and all-optical communication.

Transverse Writing of Multimode Interference Waveguides Inside Silica Glass by Femtosecond Laser Pulses

Compact 1 X 3 Waveguide Beam Splitters with Variable Splitting Ratios in LiNbO3 Crystal Fabricated by Femtosecond Laser Direct Writing

Transverse writing of three-dimensional tubular optical waveguides in glass with a slit-shaped femtosecond laser beam

Transverse writing of three-dimensional tubular optical waveguides in glass with slit-shaped femtosecond laser beams

Femtosecond laser writing low-loss waveguides in silica glass: highly symmetrical mode field and mechanism of refractive index change

Direct Writing of Channel Optical Waveguides in Er 3+ -Doped Aluminosilicate Glass by Low Repetition Rate Femtosecond Laser

Transmission Performance of 90°-Bend Optical Waveguides Fabricated in Fused Silica by Femtosecond Laser Inscription.

Nonlinear Optical Waveguide Devices Based on Femtosecond Laser Direct Writing and Thermal Poling in Bulk Fused Silica

Effectively Writing Low Propagation and Bend Loss Waveguides in the Silica Glass by Using a Femtosecond Laser.

Multiple Waveguides Fabricated Simultaneously by Femtosecond Laser Pulses Inside Fused Silica Glasses Using a Multiple Foci Approach

Optical Waveguide Writing Inside Foturan Glass with Femtosecond Laser Pulses

Low-Loss Channel Optical Waveguide Fabrication in Nd3+-Doped Silicate Glasses by Femtosecond Laser Direct Writing

Mode-tunable Low-Loss Waveguides in Glass for Visible Light Photonic Integrated Devices

Mode Tailoring of Laser Written Waveguides in LiNbO3 Crystals by Multi-Scan of Femtosecond Laser Pulses

Manufacturing of double-layered multimode optical waveguides in glass substrate

Parallel femtosecond laser direct writing in silica glass by multiple beams with different wavefront curvature

Influence of Focusing Depth on the Microfabrication of Waveguides Inside Silica Glass by Femtosecond Laser Direct Writing

Femtosecond Laser Writing of Optical Waveguides by Self-Induced Multiple Refocusing in LiTaO3 Crystal

Femtosecond Laser Writing of Optical Waveguides by Self-Induced Multiple Refocusing in LiTaO 3 Crystal

Femtosecond laser direct writing of multiwavelength Bragg grating waveguides in glass

Suppression of bend loss in writing of three-dimensional optical waveguides with femtosecond laser pulses