Abstract:The symmetrical optical waveguide structures are fabricated in Er3+-doped aluminosilicate glass using 800 nm femtosecond laser writing in kHz repetition frequency regime. The impact of writing parameters on the waveguide preparation with a 10× microscope objective in the longitudinal writing scheme was studied in detail. The experimental results show that, under a fixed pulse energy value of 20 μJ, the waveguides can be realized with the scan speed from 20 to 160 μm/s, and with a fixed scan speed value of 160 μm/s, the waveguide can be prepared under an inscription energy range of 5–30 μJ, indicating that the waveguide can be realized in a wide range of writing parameters. The near-field mode intensity image shows that the waveguide region possesses excellent light guiding properties. Based on the refractive index profile reconstruction method, the maximum refractive index increase in the waveguide region is estimated to be about 5.5 × 10–4. The lowest propagation loss of the waveguide was measured to be about 1.51 dB/cm by the waveguide side scattering method. The microfluorescence spectra show that the gain characteristics of the waveguide region are well maintained after laser processing. This work shows that the fabrication of embedded optical waveguides using ultrashort pulse laser in Er3+-doped aluminosilicate glass has strong feasibility and great potential to create active gain devices in the field of integrated photonics and all-optical communication.

Transverse writing of three-dimensional tubular optical waveguides in glass with slit-shaped femtosecond laser beams

Transverse writing of three-dimensional tubular optical waveguides in glass with a slit-shaped femtosecond laser beam

Fabrication of Optical Cavities with Femtosecond Laser Pulses

Single scan femtosecond laser transverse writing of depressed cladding waveguides enabled by three-dimensional focal field engineering.

Transverse Writing of Multimode Interference Waveguides Inside Silica Glass by Femtosecond Laser Pulses

Mode-tunable Low-Loss Waveguides in Glass for Visible Light Photonic Integrated Devices

Optical Waveguide Writing Inside Foturan Glass with Femtosecond Laser Pulses

Fabricating Low Loss Waveguides over a Large Depth in Glass by Temperature Gradient Assisted Femtosecond Laser Writing.

Fabrication of polarization-independent waveguides deeply buried in crystal using aberration-corrected femtosecond laser direct writing

Fabrication of Polarization-Independent Waveguides Deeply Buried in Lithium Niobate Crystal Using Aberration-Corrected Femtosecond Laser Direct Writing

Fabrication and characterization of femtosecond laser written waveguides in chalcogenide glass

Three-dimensional Microfluidic Channel with Arbitrary Length and Configuration Fabricated Inside Glass by Femtosecond Laser Direct Writing.

Fabrication of Single-Mode Circular Optofluidic Waveguides in Fused Silica Using Femtosecond Laser Microfabrication

Femtosecond Laser Writing of Optical Waveguides by Self-Induced Multiple Refocusing in LiTaO3 Crystal

Waveguides Fabricated by Femtosecond Laser Exploiting Both Depressed Cladding and Stress-Induced Guiding Core

Low-loss optofluidic waveguides in fused silica enabled by spatially shaped femtosecond laser assisted etching combined with carbon dioxide laser irradiation

Photonic Lattice-Like Waveguides in Glass Directly Written by Femtosecond Laser for On-Chip Mode Conversion

Ultrafast laser inscribed waveguides in tailored fluoride glasses: an enabling technology for mid-infrared integrated photonics devices

Femtosecond Laser Writing of Optical Waveguides by Self-Induced Multiple Refocusing in LiTaO 3 Crystal

Direct Writing of Channel Optical Waveguides in Er 3+ -Doped Aluminosilicate Glass by Low Repetition Rate Femtosecond Laser

Photowritten Optical Waveguides in Various Glasses with Ultrashort Pulse Laser