Abstract:The High Intensity Heavy Ion Accelerator Facility (HIAF) is a new engineering project proposed by Institute of Modern Physics (IMP) of China. Various types of superconducting wires with the matrix of CuNi alloy for HIAF project were successfully developed by WST. NbTi/Cu5Ni superconducting wires with filaments number of 10800, 12960, 15984, 23760, 36720 and 44064 were designed and fabricated by a double stacking method. In this study, the microstructure and influence of a heat treatment on the critical current density, hysteresis loss and number of breaks of NbTi/Cu5Ni superconducting wire are investigated. It is demonstrated that when the number of heat treatments increases from 3 to 5, the critical current density increases from 2324 to 2699 A/mm 2 at 5T&4.2K for a 10800-filament wire. However, the number of breaks per one billet increases from 0 to 3. The maximum and minimum piece length is 3500 and 1000 m, respectively. The Nb barrier fracture results in the formation of the Ti-Cu compound between NbTi filaments and Copper during intermediate heat treatment. By reducing the Cu/Sc of sub-elements and improving the Cu shell thickness of the final billet, the deformation of outer filament is relatively favorable, which can enhance the critical current density and reduce hysteresis loss. The critical current density of six designed wires is between 2600 and 2700 A/mm 2 and `n' value is between 35 and 48 at 5T&4.2K, indicating a high filament quality and that no filament breakage occurs in the wire. The Cu5Ni alloy is regarded as the inter-filament matrix to reduce inter-filament coupling currents loss. When the filament number increases from 10800 to 44064 and the diameter of NbTi filament reduces from 4.5 to 2.5 μm, the hysteresis losses reduce from 38.5 to 26.2 mJ/cm 3 at ±3T. The average piece length of six designed wires is more than 2000 m, revealing the ability of mass production for WST. After 5 years investigations WST have developed several designs and the fabrication technology of this type of wire and can completely satisfy the requirements of HIAF magnets.

The Technology of Fabrication & Application of Bi-2223 HTS Wires at InnoST

Research status of the manufacturing technology and application properties of Bi-2223/Ag tapes at Innost

Development of HTS BSCCO Wire for Power Applications

Study on High JC and Low AC Loss NbTi/Cu5Ni Superconducting Wire for HIAF Magnets in WST

Conceptual Design of a HTS CICC Coil for Fusion Devices based on Bi-2223 Tapes

Manufacture and Test of Bi-2212 Cable-In-Conduit Conductor

Development of Electromagnetic Forming Nbti Superconducting Joint

Fabrication of Nbti Superconducting Joint by Electromagnetic Forming Method

R&D of Applied Superconductivity by a Small Business: Experiences and Future Perspective

Study on the NbTi/Cu30Ni Superconducting Switch Wire Recently in WST

The Conceptual Optimal Design of a 300MJ High Temperature Superconducting Magnet

A review of commercial high temperature superconducting materials for large magnets: from wires and tapes to cables and conductors

Progress in high temperature superconductor coated conductors and their applications

Development of a Bi-2212 Solenoid Insert Coil in a 12 T Superconducting Magnet

Performance and Microstructure of Bi-2212 Wire under Different OverPressures Heat-treatment

Manufacture and Testing of Pre-prototype HTS Twisted Stack Slotted-Core Cable

White Paper on High Temperature Superconducting Bi-2212 Magnets for Energy Frontier Circular Colliders

R&D of No-Insulation HTS Magnets Using 2G Wires in a Prototype for Maglev Applications

ANALYSIS OF A CONDUCTION-COOLED HTS MAGNET

Development of high-performance iron-based superconducting wires and tapes

Design and Development of 16-Ka HTS Current Lead for HMFL 45-T Magnet