Abstract:The High Intensity Heavy Ion Accelerator Facility (HIAF) is a new engineering project proposed by Institute of Modern Physics (IMP) of China. Various types of superconducting wires with the matrix of CuNi alloy for HIAF project were successfully developed by WST. NbTi/Cu5Ni superconducting wires with filaments number of 10800, 12960, 15984, 23760, 36720 and 44064 were designed and fabricated by a double stacking method. In this study, the microstructure and influence of a heat treatment on the critical current density, hysteresis loss and number of breaks of NbTi/Cu5Ni superconducting wire are investigated. It is demonstrated that when the number of heat treatments increases from 3 to 5, the critical current density increases from 2324 to 2699 A/mm 2 at 5T&4.2K for a 10800-filament wire. However, the number of breaks per one billet increases from 0 to 3. The maximum and minimum piece length is 3500 and 1000 m, respectively. The Nb barrier fracture results in the formation of the Ti-Cu compound between NbTi filaments and Copper during intermediate heat treatment. By reducing the Cu/Sc of sub-elements and improving the Cu shell thickness of the final billet, the deformation of outer filament is relatively favorable, which can enhance the critical current density and reduce hysteresis loss. The critical current density of six designed wires is between 2600 and 2700 A/mm 2 and `n' value is between 35 and 48 at 5T&4.2K, indicating a high filament quality and that no filament breakage occurs in the wire. The Cu5Ni alloy is regarded as the inter-filament matrix to reduce inter-filament coupling currents loss. When the filament number increases from 10800 to 44064 and the diameter of NbTi filament reduces from 4.5 to 2.5 μm, the hysteresis losses reduce from 38.5 to 26.2 mJ/cm 3 at ±3T. The average piece length of six designed wires is more than 2000 m, revealing the ability of mass production for WST. After 5 years investigations WST have developed several designs and the fabrication technology of this type of wire and can completely satisfy the requirements of HIAF magnets.

Development of HTS BSCCO Wire for Power Applications

The Technology of Fabrication & Application of Bi-2223 HTS Wires at InnoST

Progress in second-generation HTS wire development and manufacturing

Research status of the manufacturing technology and application properties of Bi-2223/Ag tapes at Innost

The Development of 4 M HTS Power Cable

Summary of the First Generation High Temperature Superconducting Wire: Processing, Characterization and Applications

Research and development of high Tc superconducting tapes

Design Research on the Conductor of 10 Ka Class HTS DC Power Cable

Development and Application Overview of High Temperature Superconducting Cable

Study on High JC and Low AC Loss NbTi/Cu5Ni Superconducting Wire for HIAF Magnets in WST

Progress in Scale-Up of Second-Generation HTS Conductor

Manufacture and Testing of Pre-prototype HTS Twisted Stack Slotted-Core Cable

Recent Advances of HTS Power Application Research at IEE

Testing Results for the Cable Core of a 360 m/10 kA HTS DC Power Cable Used in the Electrolytic Aluminum Industry

Progress in high temperature superconductor coated conductors and their applications

A Study on Critical Current and AC Loss Characteristics of Novel 2G HTS Narrow Wires

High-Performance YBCO-Coated Superconductor Wires

Performance of First Bi-2212 Cable with Pre-over Pressure and over Pressure Heat Treatment

Critical Current Degradation Caused By Winding Process Of Bi-2223/Ag Hts Wire In The Form Of A Coil

Second Generation YBCO Coated Conductors: A Review

A high temperature superconducting winding and its techniques