Abstract:With the development of superconducting magnet technology, high magnetic field experimental conditions can be more easily achieved than ever. Recently, a superconducting magnet with the center field of 25 T at 4.2 K and a worm bore size of 32 mm in diameter has been designed. The superconducting magnet consists of NbTi, Nb3Sn coils, and YBCO insert. The YBCO insert has been designed, fabricated, and tested in the liquid helium at the Institute of Electrical Engineering, Chinese Academy of Sciences (IEE, CAS), to prove the technical feasibility to achieve the target of 25 T. The YBCO insert has the inner diameter, outer diameter, and height of 41, 124, and 115 mm, respectively. The critical current distribution of the YBCO insert at 77 and 4.2 K, self-field, and in a 15-T background field is given in detail, based on the electrical properties of an YBCO-coated conductor. An analysis on the critical current shows that the YBCO insert has a minimum critical current of 19.4 A at 77 K, 119 A at 4.2 K, at the self-field, respectively, and 177 A at 4.2 K in a 15-T background field. Preliminary tests in the liquid nitrogen and liquid helium show that the analysis on the critical current is reasonable and agrees well with the test. The analysis on critical current at 4.2 K shows that it is much reasonable for the YBCO insert to obtain a central magnetic field of up to 24 T in a 15-T background field. In this paper, the design, critical current analysis, and preliminary experiment are reported.

Development of a Bi-2212 Solenoid Insert Coil in a 12 T Superconducting Magnet

Development of YBCO Insert for a 25 T All Superconducting Magnet

Design and Preliminary Tests of a 20-T REBCO Insert Coil for a 35-T All Superconducting Magnet

Progress in the Construction of a 20 T REBCO Insert Coil for High-Field All-Superconducting Magnets

The first CICC-type Bi-2212 insert coil for high-field applications up to 20 T

The Conceptual Optimal Design of a 300MJ High Temperature Superconducting Magnet

Critical Current Analysis of an Ybco Insert for Ultrahigh-Field All-Superconducting Magnet

Experiment of Joints Resistance and Critical Current of Bi2212 Conductor

Design, Fabrication, and Test of a 12 T REBCO Insert for a 27 T All-Superconducting Magnet

The Optimal Design Of A 300mj Superconducting Magnet Using Hts Tapes

The Design and Winding Method of A Conduction-Cooled 1.5 T Bi-2223 High Temperature Superconducting Magnet

The Optimal Design of a 300~MJ Superconducting Magnet Using HTS Tapes

Fabrication of Bi-2223 High Temperature Superconducting Magnet

Design of a 15 T Hybrid Superconducting Magnet

Experimental Study on A Nb3al Insert Coil under High Magnetic Field

Performance and Microstructure of Bi-2212 Wire under Different OverPressures Heat-treatment

Stability study of Bi‐2212 conductor based on perturbation spectrum for hybrid superconducting magnet

Design study of conduction-cooled high temperature superconducting magnet

High Temperature Superconducting YBCO Insert for 25 T Full Superconducting Magnet

Winding R&D for CFETR Central Solenoid Model Coil

Fabrication Technique of the Model Coil for the 40-T Hybrid Magnet Superconducting Outsert