Abstract:1 General Introduction A key to the realization of effective microwave tunable devices, among others, is to develop adaptive materials with superior adjustability of electromagnetic parameters. Since there are two fundamental electromagnetic parameters, namely, permittivity and permeability, the tunable property can then be readily approached by manipulating (i) permittivity directly via the electric field, such as in ferroelectrics and conducting polymer [1, 2], or (ii) permeability via magnetic field, such as in ferromagnetic materials [3], or (iii) permittivity (permeability) indirectly by magnetic field (electric field) such as in multiferroics [4]. A unique class of composite materials is considered here to realize such tunable properties: ferromagnetic microwires with excellent soft magnetic properties and giant magnetoimpedance effect [5,6] were introduced into a polymer matrix material so that an indirect control of permittivity can be tuned by the magnetic field. The principle is that the magnetic field can induce significant variation of the impedance via the skin effect at high frequency. The current distribution along the wire then changes accordingly and induces the dipolar polarization [7]. There have been a few relevant studies on this subject in the open literature. Panina et al. [8] and Acher et al. [9] used the microwire arrays to realize the left-hand materials and tunable properties in the presence of magnetic field. Starostenko et al. [10] gave an in-depth discussion of the magnetic bias effect on the permittivity for random wire composites and proved the feasibility of using the wire composites to control attenuation. Di et al. [11], Marin et al. [12] and Zhang et al. [13] have demonstrated the perspective of microwire composites as microwave absorbers. In addition, our previous studies have shown that this kind of composite prove to be multifunctional for a wide range of potential engineering applications such as sensing and structural health monitoring (see e.g. [14-16]). The aim of this paper is to utilize instrumentation [17] dedicated to precise in-situ measurements of electromagnetic parameters to characterize the microwire composites over a broad frequency range and the field effect on the microwave behaviors of the wire composites for potential structural health monitoring (SHM) application.

Preparation and microwave characteristics of magnetic iron fibers

Solution Synthesis and Novel Magnetic Properties of Ball-Chain Iron Nanofibers

Preparation and Electromagnetic Characteristics of a Novel Iron-Coated Carbon Fiber

1D Magnetic Materials of Fe 3 O 4 and Fe with High Performance of Microwave Absorption Fabricated by Electrospinning Method

The microwave electromagnetic and absorption properties of some porous iron powders

Smart Composites With Short Ferromagnetic Microwires For Microwave Applications

Fe-Based Ferromagnetic Microwires Enabled Meta-Composites

Magnetic Field-Dependent Effective Microwave Properties of Microwire-Epoxy Composites

Research On Synthesis And Microwave-Absorbing Behavior Of Polycrystalline Iron Fibers

Microwave Properties of Metacomposites Containing Carbon Fibres and Ferromagnetic Microwires

In-situ Microwave Characterization of Ferromagnetic Microwires-Filled Polymer Composites: A Mini Review

Magnetic and microwave properties of glass-coated amorphous ferromagnetic microwires

Electromagnetic and Microwave Absorption Properties of Carbonyl Iron/Mno2 Composite

Microwave tunable composites with melt-extracted magnetic microwires

Microwave Absorption Properties of the Ni Nanofibers Fabricated by Electrospinning

Preparation and properties of a novel iron-coated carbon fiber

Multi-interfacial 1D magnetic ferrite@C fibers for Broadband microwave absorption

Two-peak Feature of the Permittivity Spectra of Ferromagnetic Microwire/rubber Composites

Dielectric Properties of Composites Containing Melt-Extracted Co-Based Microwires

In Situ Microwave Characterization of Microwire Composites with External Magnetic Field

Complex Permittivity And Permeability Of Metallic Magnetic Granular Composites At Microwave Frequencies