Abstract:Fe3O4/carbon composite nanofibers were prepared by electrospinning polyacrylonitrile (PAN)/acetyl acetone iron (AAI)/dimethyl formamide (DMF) solution, followed by stabilization and carbonization. SEM and TEM observations reveal that the fibers are lengthy and uniform, and are loaded with well-distributed Fe3O4 nanoparticles, which are evidenced by XRD. Electrical and magnetic properties of the samples were studied to show the effect of enhancement of electrical conductivity and magnetic hysteresis performance. Finally, the permittivity and permeability parameters were measured by a vector network analyzer, and the reflectivity loss was calculated based on Transmission Line Theory. Results show that Fe3O4/C composite nanofibers exhibit enhanced properties of microwave absorption as compared to those of pure carbon nanofibers by: decreasing reflectivity loss values; widening absorption width and improving performance in low frequency (2-5 GHz) absorption. Absorption properties can be tuned by changing MI content, carbonization temperature, composite fiber/paraffin ratio and coating thickness. It is shown that with coating thickness of 5 mm and fiber/paraffin ratio of 5 wt.%, the bandwidth for reflection loss under -5 dB can reach a maximum of 12-13 GHz in the range of 2-18 GHz, accompanying with a minimum reflection loss of -40 to -45 dB, and preferred low frequency band absorption can also be obtained. The mechanisms for the enhanced absorption performance were briefly discussed. It is supposed that this kind of composite material is promising for resolving the problems of weak absorption in the low frequency range and narrow bandwidth absorption. (C) 2012 Elsevier B.V. All rights reserved.

Preparation and properties of a novel iron-coated carbon fiber

Preparation and Electromagnetic Characteristics of a Novel Iron-Coated Carbon Fiber

Optimized Design of the Wave-Absorbing Coating Made of Carbonyl Iron Powders

A Novel Continuous Carbon Nanotube Fiber/carbon Composite by Electrified Preform Heating Chemical Vapor Infiltration

Synthesis and Application of Iron-Filled Carbon Nanotubes Coated with FeCo Alloy Nanoparticles

Preparation and enhancement microwave absorption properties of carbon fibers coated with CoNi alloy by solvothermal

Large-scale preparation of Co nanoparticles as an additive in carbon fiber for microwave absorption enhancement in C band

Preparation and properties of cobalt oxides coated carbon fibers as microwave-absorbing materials

Fe3O4/carbon Composite Nanofiber Absorber with Enhanced Microwave Absorption Performance

Microwave Absorption Properties of Co/C and Ni/C Composite Nanofibers Prepared by Electrospinning

A Carbonyl Iron/Carbon Fiber Material for Electromagnetic Wave Absorption

A novel cation-π coating of carbon fiber for promoting interfacial properties of fiber-based composites

Preparation and Properties of Carbon Fiber/Carbon Nanotube Wet-Laid Composites

Mechanical and Electromagnetic Wave Absorption Performance of Carbonyl Iron Powder-Modified Nonwoven Materials

Nano Bimetallic@Carbon Layer on Porous Carbon Nanofibers with Multiple Interfaces for Microwave Absorption Applications

Electromagnetic and Mechanical Properties of Carbonyl Iron Powders-Pla Composites Fabricated by Fused Deposition Modeling

Preparation of magnetic ferrocarbon matrix composites and study on their microwave dielectric properties

Cobaltosic oxide fiber/Carbon Fiber composites fabricated by hydrothermal for improved electromagnetic interference shielding properties

Synthesis and microwave absorption properties of carbon coil–carbon fiber hybrid materials

Microwave absorption performance and multiple loss mechanisms of three-dimensional porous Fe4N@Fe3O4@Fe/carbon composite

Synthesis of N-doped carbon with embedded Fe/Fe3C particles for microwave absorption