Abstract:1 General Introduction A key to the realization of effective microwave tunable devices, among others, is to develop adaptive materials with superior adjustability of electromagnetic parameters. Since there are two fundamental electromagnetic parameters, namely, permittivity and permeability, the tunable property can then be readily approached by manipulating (i) permittivity directly via the electric field, such as in ferroelectrics and conducting polymer [1, 2], or (ii) permeability via magnetic field, such as in ferromagnetic materials [3], or (iii) permittivity (permeability) indirectly by magnetic field (electric field) such as in multiferroics [4]. A unique class of composite materials is considered here to realize such tunable properties: ferromagnetic microwires with excellent soft magnetic properties and giant magnetoimpedance effect [5,6] were introduced into a polymer matrix material so that an indirect control of permittivity can be tuned by the magnetic field. The principle is that the magnetic field can induce significant variation of the impedance via the skin effect at high frequency. The current distribution along the wire then changes accordingly and induces the dipolar polarization [7]. There have been a few relevant studies on this subject in the open literature. Panina et al. [8] and Acher et al. [9] used the microwire arrays to realize the left-hand materials and tunable properties in the presence of magnetic field. Starostenko et al. [10] gave an in-depth discussion of the magnetic bias effect on the permittivity for random wire composites and proved the feasibility of using the wire composites to control attenuation. Di et al. [11], Marin et al. [12] and Zhang et al. [13] have demonstrated the perspective of microwire composites as microwave absorbers. In addition, our previous studies have shown that this kind of composite prove to be multifunctional for a wide range of potential engineering applications such as sensing and structural health monitoring (see e.g. [14-16]). The aim of this paper is to utilize instrumentation [17] dedicated to precise in-situ measurements of electromagnetic parameters to characterize the microwire composites over a broad frequency range and the field effect on the microwave behaviors of the wire composites for potential structural health monitoring (SHM) application.

Two-peak Feature of the Permittivity Spectra of Ferromagnetic Microwire/rubber Composites

In Situ Microwave Characterization of Microwire Composites with External Magnetic Field

Dielectric Properties of Composites Containing Melt-Extracted Co-Based Microwires

Mechanical-Electromagnetic Coupling Of Microwire Polymer Composites At Microwave Frequencies

Magnetic Field-Dependent Effective Microwave Properties of Microwire-Epoxy Composites

Smart Composites With Short Ferromagnetic Microwires For Microwave Applications

Fe-Based Ferromagnetic Microwires Enabled Meta-Composites

Magnetic Field and Mechanical Stress Tunable Microwave Properties of Composites Containing Fe-based Microwires

In Situ Microwave Characterization Of Microwire Composites Under Mechanical Stress

Effects of Wire Properties on the Field-Tunable Behaviour of Continuous-Microwire Composites

Tunable microwave frequency performance of nanocomposite Co 2MnSi/PZN-PT magnetoelectric coupling structure

Microwave tunable composites with melt-extracted magnetic microwires

Dual-band metacomposites containing hybrid Fe and Co-based ferromagnetic microwires

Field/stress Tunable Behaviour of Composites Containing the Combined Current-Modulation Annealed Ferromagnetic Microwires

A rational design of microwire/CNT hybrid fiber for tunable microwire metacomposites

Co-Based Magnetic Microwire and Field-Tunable Multifunctional Macro-Composites

E-Field Tuning Microwave Frequency Performance Of Co2fesi/Lead Zinc Niobate-Lead Titanate Magnetoelectric Coupling Composites

Ferromagnetic Microwires Enabled Polymer Composites for Sensing Applications

Microwires Enabled Metacomposites Towards Microwave Applications

Dielectric Properties of Composites Containing Meltextracted Co-based Microwires

Macro-composites Containing Ferromagnetic Microwires for Structural Health Monitoring