Abstract:The fabrication art of the membrane electrode assembly (MEA) in a proton-exchange membrane (PEM) fuel cell strongly correlates to the cell performance. It has been recognized that defects, for example, high interfacial resistance between the catalyst layers (CLs) and the membrane or cracks in the CLs, may occur during the MEA manufacturing process. These defects could greatly influence the electrochemical performance of the fuel cell. To eliminate those defects and improve the cell performance, in this study, a novel fabrication approach of the MEA for PEM fuel cells is developed. With this method, the Nafion ionomer, employed as a PEM, is directly coated onto both the cathode and anode CLs. As a result, not only an excellent interfacial connection between the PEM and CLs is achieved with a low interfacial resistance, but also cracks are eliminated due to Nafion ionomer penetration into the cracks, forming hydrophilic channels with ionic conduction. Those ionic conduction channels improve the water management, lower the mass transport loss, and facilitate the proton transfer, thus maximizing the three-phase boundary and enhancing the utilization of Pt/C catalysts. By adding an expanded polytetrafluoroethylene film, a favorable mechanical property of the MEA is also achieved. This novel MEA exhibits excellent cell performance under low humidity conditions. Under the H<sub>2</sub>/air operation, the cell performance reaches a high maximum power density of 1.35 W cm<sup>–2</sup>.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acssuschemeng.0c02386?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acssuschemeng.0c02386</a>.SEM images, photographs of MEAs and fitted impedance parameters for the MEAs (<a class="ext-link" href="/doi/suppl/10.1021/acssuschemeng.0c02386/suppl_file/sc0c02386_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Addition of NH4HCO3 As Pore-Former in Membrane Electrode Assembly for PEMFC

Development of Cathode Ordered Membrane Electrode Assembly Based on TiO2 Nanowire Array and Ultrasonic Spraying

Effect of pore forming agents on the performance of membrane electrode assembly in HT-PEMFC

Dual-functional phosphoric acid-loaded covalent organic framework for PEMFC self-humidification: Optimization on membrane electrode assembly

Enhanced MEA Performance for PEMFCs under Low Relative Humidity and Low Oxygen Content Conditions Via Catalyst Functionalization

Optimizing proton exchange membrane fuel cell performance at low-humidity via constructing additional anodic water-retaining membrane layer containing sulfonated multi-walled carbon nanotubes

Optimizing Catalyst Layer Structure with Carbon Nanofiber Additive for Better Performance of Proton Exchange Membrane Fuel Cell

A Novel Approach to Fabricate Membrane Electrode Assembly by Directly Coating the Nafion Ionomer on Catalyst Layers for Proton-Exchange Membrane Fuel Cells

Study on performance of membrane electrode assembly with domestic materials for PEMFC

The Performance Improvement of Membrane and Electrode Assembly in Open-Cathode Proton Exchange Membrane Fuel Cell

The Performance of H2/air Self-Humidifying MEA for PEMFC

Investigation of the catalyst ink compositions for a uniform microporous catalyst layer preparation via electrospray deposition technique and MEA assembling conditions in PEMFC specific

The fabrication of integrated proton exchange membrane fuel cells: Excellent mechanical strength and electrochemical performance

Effective single web-structured electrode for high membrane electrode assembly performance in polymer electrolyte membrane fuel cell

Comprehensive study and optimization of membrane electrode assembly structural composition in proton exchange membrane water electrolyzer

All sprayed fluorine-free membrane electrode assembly for low-platinum and low-humidity proton exchange membrane fuel cells

Advances in Low Pt Loading Membrane Electrode Assembly for Proton Exchange Membrane Fuel Cells

A novel preparation for a self-humidifying membrane electrode assembly and performance of its fuel cell

The buffer microporous layer improved water management for proton exchange membrane fuel cell at varying humidification

Influence and Improvement of Membrane Electrode Assembly Fabrication Methods for Proton Exchange Membrane Water Electrolysis

Catalyst Layer Structure of Membrane Electrode Assemblies in PEMFC