Abstract:The preparation method of membrane electrode assemblies (MEAs) is a key factor that determines their electrochemical performance and lifespan. In this study, we develop a novel preparation method based on a wet-combining interface forming strategy for fabricating a high-performance MEA with an ultrathin proton exchange membrane (PEM). Through this method, an integrated MEA (R-MEA), assembled with an ultrathin (<10 mu m) membrane reinforced with expanded polytetrafluoroethylene (ePTFE), is fabricated. In the wet-combining process, the liquid perfluorosulfonic acid (PFSA) ionomer sufficiently adheres to the surface of the three-dimensional (3D) catalyst layer (CL) of the gas diffusion electrode (GDE), thus forming a 3D coupling interface between the PEM and the cathode CL. Such a tight 3D PEM/cathode CL interface enlarges the contact area between the PEM and the cathode CL, thereby increasing the triple-phase boundary for the oxygen reduction reaction. On this basis, the novel R-MEA exhibits a significantly higher electrochemical surface area and a superior power performance compared to a conventional MEA (C-MEA) prepared by the catalyst-coated membrane method. Furthermore, the introduction of the ePTFE reinforcement in the PEM makes R-MEA possess a hydrogen crossover current close to that of C-MEA (which has a commercial GORE-SELECT membrane as its PEM). After 1000 cycles of wet/dry conditions, the R-MEA still maintains its superior power performance and a stable hydrogen crossover current, thus demonstrating its excellent mechanical durability.

Effect of pore forming agents on the performance of membrane electrode assembly in HT-PEMFC

Addition of NH4HCO3 As Pore-Former in Membrane Electrode Assembly for PEMFC

Development of Cathode Ordered Membrane Electrode Assembly Based on TiO2 Nanowire Array and Ultrasonic Spraying

Effect of membrane deposition methods on the performance of membrane electrode assemblies

Preparation of an Integrated Membrane Electrode Assembly for Proton Exchange Membrane Fuel Cells Using a Novel Wet-Bonding Strategy

Enhanced MEA Performance for PEMFCs under Low Relative Humidity and Low Oxygen Content Conditions Via Catalyst Functionalization

Influence and Improvement of Membrane Electrode Assembly Fabrication Methods for Proton Exchange Membrane Water Electrolysis

A High-Performance Membrane Electrode Assembly with an Ultrathin Proton Exchange Membrane Based on a Wet-Combining Interface Forming Strategy

Optimizing proton exchange membrane fuel cell performance at low-humidity via constructing additional anodic water-retaining membrane layer containing sulfonated multi-walled carbon nanotubes

An Asymmetric Membrane Electrode Assembly for High-Performance Proton Exchange Membrane Fuel Cells

Study on performance of membrane electrode assembly with domestic materials for PEMFC

The fabrication of integrated proton exchange membrane fuel cells: Excellent mechanical strength and electrochemical performance

Enhanced MEA Performance for an Intermediate-Temperature Fuel Cell with a KH5(PO4)2-Doped Polybenzimidazole Membrane

The Performance Improvement of Membrane and Electrode Assembly in Open-Cathode Proton Exchange Membrane Fuel Cell

Reinforced Integrated Membrane Electrode Assembly Based on Ionomer Wet-Binding and Eptfe Reinforcement Strategy for Proton Exchange Membrane Fuel Cells

Effect of Electrode Composition on the Performance of Proton Exchange Membrane Fuel Cell

Recent Advances in Pt Catalysts and Membrane Electrode Assemblies Fabrication for Proton Exchange Membrane Fuel Cells

Comprehensive study and optimization of membrane electrode assembly structural composition in proton exchange membrane water electrolyzer

Nanostructure Engineering of Cathode Layers in Proton Exchange Membrane Fuel Cells: From Catalysts to Membrane Electrode Assembly

Fabrication And Electrochemical Performance Of Poly (2,5-Benzimidazole) (Abpbi)-Based Mea By Catalyst Coated Membrane (Ccm) Method For High-Temperature Polymer Electrolyte Fuel Cells

The buffer microporous layer improved water management for proton exchange membrane fuel cell at varying humidification