Abstract:This paper proposes an all−digital calibration algorithm that utilizes a reference channel to suppress the timing mismatch in the Time−Interleaved Analog−to−Digital Converter (TIADC). The output of the reference channel is aligned with each sub−channel in turn, therefore enabling the simultaneous sampling and conversion of the same input signal. First, the statistical characteristics across the channels are employed for estimating the timing mismatch; then, by comparing the output difference between the reference channel and the sub−channels that are sampled simultaneously, the deviation of the derivator can be calibrated. Finally, combining both calibration results yields an accurate final output. This proposed algorithm provides an effective solution to improve TIADC performance in high−speed data acquisition systems. The proposed architecture is applied to a 12−bit 2.4 GS/s four−channel TIADC model, and then its effectiveness is verified. The simulation results exhibit that the Effective Number Of Bits (ENOB) at an input signal frequency of 984 MHz shows a remarkable improvement from 6.88 bits to 11.92 bits. The effectiveness of this technique is also demonstrated through the off−chip calibration of a commercial 12−bit four−channel 2 GS/s TIADC using a 680 MHz input signal that is based on the actual chip results.

A Mixed Sample-Time Error Calibration Technique in Time-Interleaved ADCs

A Sample-Time Error Calibration Technique in Time-Interleaved ADCs with Correlation-Based Detection and Voltage-Controlled Compensation

A 14-Bit 200-Ms/s Time-Interleaved Adc with Sample-Time Error Calibration

Modeling of digital background calibration with signal-dependent dithering for a 14-bit, 100-MS/s pipelined ADC

A Calibration Scheme for a 800-Ms/s 14 Bit Pipelined ADC in 28-Nm CMOS

The fast time-interleaved ADC channel mismatch calibration method based on equivalent sampling and dynamic reference point

A Digital-Background TIADC Calibration Architecture and a Fast Calibration Algorithm for Timing-Error Mismatch

A Maximum-Likelihood-Estimation-Based Digital Background Calibration Technique for Interstage Gain Error in Pipelined ADCs

An All−Digital Timing Mismatch Calibration Algorithm Based on Reference Channel for TIADC

A Statistic-Based Calibration Method for TIADC System

A Time-Spreading Calibration Technique for Multi-Bit/stage Pipeline ADCs

A Digital Calibration Technique for N-channel Time-Interleaved ADC Based on Simulated Annealing Algorithm

Calibration of Channel Mismatches in Time-interleaved ADCs Based on Multi-Frequency Reference Error Method

A Wideband Timing Mismatch Calibration Design for Time-Interleaved Analog-to-Digital Converters with Fast Convergence

Calibration of Time-Skew Error in a M-Channel Time-Interleaved Analog-to-Digital Converters

A New All-Digital Background Calibration Technique for Time-Interleaved ADC Using First Order Approximation FIR Filters

A Dithered-Digital-Mixing Background Timing-Skew Calibration Method for Time-Interleaved ADCs

A Novel Autocorrelation-Based Timing Mismatch C Alibration Strategy in Time-Interleaved ADCs

A Digital Timing Mismatch Calibration Technique in Time-Interleaved ADCs.

Estiamtion and Correction of Mismatch Errors in Time-Interleaved Adcs

Machine-Learning Based Mismatch Calibration for Time-Interleaved ADCs