Abstract:This paper presents a two-mode digital calibration technique for pipelined analog-to-digital converters (ADC). The proposed calibration eliminates the errors of residual difference voltage induced by capacitor mismatch of pseudorandom (PN) sequence injection capacitors at the ADC initialization, while applies digital background calibration to continuously compensate the interstage gain errors in ADC normal operation. The presented technique not only reduces the complexity of analog circuit by eliminating the implementation of PN sequence with accurate amplitude in analog domain, but also improves the performance of digital background calibration by minimizing the sensitivity of calibration accuracy to sub-ADC errors. The use of opamps with low DC gains in normal operation makes the proposed design more compatible with future nanometer CMOS technology. The prototype of a 12-bit 40-MS/s pipelined ADC with the two-mode digital calibration is implemented in 0.18-μm CMOS process. Adopting a simple telescopic opamp with a DC gain of 58-dB in the first stage, the measured SFDR and SNDR within the first Nyquist zone reach 80-dB and 66-dB, respectively. With the calibration, the maximum integral nonlinearity (INL) of the ADC reduces from 4.75-LSB to 0.65-LSB, while the ADC core consumes 82-mW at 3.3-V power supply.

A Time-Spreading Calibration Technique for Multi-Bit/stage Pipeline ADCs

Parallel background calibration with signal-shifted correlation for pipelined ADC

A Fast Combination Calibration of Foreground and Background for Pipelined ADCs

Modeling of a 14-bit, 100-MS/s pipelined ADC with digital nonlinearity calibration

A Calibration Technique Based on Frequency-Domain Characteristics for Pipelined ADCs

Modeling of digital background calibration with signal-dependent dithering for a 14-bit, 100-MS/s pipelined ADC

A Maximum-Likelihood-Estimation-Based Digital Background Calibration Technique for Interstage Gain Error in Pipelined ADCs

A Calibration Scheme for a 800-Ms/s 14 Bit Pipelined ADC in 28-Nm CMOS

An interstage gain calibration technique for pipelined ADCs exploiting Complementary dithering and calibration windows detector

A 14-bit 500MS/s and 1GS/s Configurable Pipelined ADC with Background Calibration

An Efficient Calibration Technique for Pipeline ADC.

A 14-Bit 200-Ms/s Time-Interleaved Adc with Sample-Time Error Calibration

A Robust and Simple Two-Mode Digital Calibration Technique for Pipelined ADC

A Mixed Sample-Time Error Calibration Technique in Time-Interleaved ADCs

Exploiting Process Variation and Noise in Comparators to Calibrate Interstage Gain Nonlinearity in Pipelined Adcs

A Comprehensive Digital Calibration for Pipelined ADCs Using Cascaded Nonlinearity Correction

A Wideband Timing Mismatch Calibration Design for Time-Interleaved Analog-to-Digital Converters with Fast Convergence

A Sample-Time Error Calibration Technique in Time-Interleaved ADCs with Correlation-Based Detection and Voltage-Controlled Compensation

A New Calibration Technique for Pipelined A/D Converters

Digital Background Calibration for Pipelined ADCs Based on Comparator Decision Time Quantization

A Dithered-Digital-Mixing Background Timing-Skew Calibration Method for Time-Interleaved ADCs