Abstract:High-speed $(\gt{\mathrm GS/s})$ medium-resolution (6-8b) ADCs are in high demand for wideband applications. The time-interleaved (TI) SAR ADC is widely used for its superior power efficiency. However, TI ADCs suffer from timing-skew mismatches that severely limit the performance. Some background timing-skew calibration methods rely on input derivative or input statistics such as autocorrelation [1] to detect timing-skew errors. These methods place limitations on the input signal, e.g., must be at high frequency, with large amplitude, have frequent zero crossings, etc. To be applicable to all types of input signals, some prior works inject a reference clock signal to sense the timing-skew errors [2–3]. Reference [2] injects the reference clock with slow rising edges to each interleaved channel. The timing-skew errors are detected by the difference of the injected voltages among channels. Nonetheless, it suffers from mismatches among different dither injection paths, leading to large residual timing-skew errors after calibration. Reference [3] injects the reference clock in the input common mode. However, common-mode voltage variations, as well as switch and routing mismatches among channels still result in large residual timing-skew errors. Furthermore, the periodic sampling in the calibration engine causes input impedance variation and generates spurs in the output spectrum [3]. To eliminate the residual errors and spurs, while maintaining applicability to all types of input signals, this work proposes a new background timing-skew calibration method that injects a dithered reference clock at the input buffer.

A Dithered-Digital-Mixing Background Timing-Skew Calibration Method for Time-Interleaved ADCs

Modeling of digital background calibration with signal-dependent dithering for a 14-bit, 100-MS/s pipelined ADC

A Digital-Mixing-based Method for Timing Skew Estimation in Time-Interleaved ADCs

A High Accuracy and Bandwidth Digital Background Calibration Technique for Timing Skew in TI-ADCs

A Maximum-Likelihood-Estimation-Based Digital Background Calibration Technique for Interstage Gain Error in Pipelined ADCs

Timing Skew Calibration Method for TIADC-Based 20 GSPS Digital Storage Oscilloscope.

A Timing Skew Calibration Scheme in Time-Interleaved ADC

A Background Timing Skew Calibration Technique In Time-Interleaved Adcs

Digital Background Calibration for Timing Skew in Time-Interleaved ADC.

An All-Digital Background Calibration Technique for M-Channel Downsampling Time-Interleaved ADCs Based on Interpolation

A Background Fast Convergence Algorithm for Timing Skew in Time-Interleaved ADCs

A charge pump based timing-skew calibration for time-interleaved ADC

A Digital Timing Mismatch Calibration Technique in Time-Interleaved ADCs.

All-Digital Calibration of Timing Mismatch Error in Time-Interleaved Analog-to-Digital Converters.

22.4 A 4.8GS/s 7-ENoB Time-Interleaved SAR ADC with Dither-Based Background Timing-Skew Calibration and Bit-Distribution-Based Background Ping-Pong Comparator Offset Calibration.

A Foreground Digital Calibration Algorithm for Time-Interleaved Adcs with Low Computational Complexity

A Digital-Background TIADC Calibration Architecture and a Fast Calibration Algorithm for Timing-Error Mismatch

A Fast Converging Correlation-Based Background Timing Skew Calibration Technique by Digital Windowing for Time-Interleaved ADCs

A Review on Calibration Methods of Timing-Skew in Time-Interleaved ADCs

An All−Digital Timing Mismatch Calibration Algorithm Based on Reference Channel for TIADC

An Efficient All-Digital Timing Skew Estimation Method for Time-Interleaved ADCs