Abstract:Large area, highly uniform, and density controllable carbon nanotube (CNT) films, either well-aligned or random network, are required for practical application of CNT-based electronics. Mass production methods for such CNT films and corresponding quality metrology, which are critical for pushing the CNT-based transistor technology to manufacturing, should be developed in advance. Much progress has been made on fabrication of CNT films; however, there still lacks a metrology for thoroughly quantifying their quality until now. In this paper, through comparing study of CNT films fabricated by dip-coating (DC) and direct deposition (DD) methods, local anisotropy in the film is revealed to impact the performance uniformity of devices so fabricated in a spatial scale dependent manner. The anisotropy effect should be taken into account for the quality characterization of CNT films, which was not noticed in previous studies. Based on these findings, we propose a four-parameter metrology to quantify the overall quality of the CNT films, which includes the local tube density (DL), global density uniformity (Cv), local degree of order (OL), and the relative tube proportion in a certain orientation (Pθ) at a location. The four-parameter characterization and corresponding device performance confirm DC films are superior to DD films for practical application. The four-parameter metrology is not only powerful for overall quality evaluation of CNT films, but also able to predict the fluctuation of devices’ performance. Therefore, this material metrology is important for devices and circuits design and valuable for pushing the CNT-based transistor technology forward.

FPGA based measurement of the nanotube electricity property

Measurement of the combined quantum and electrochemical capacitance of a carbon nanotube

Quantitative Measurement of Local Conductivity of SnO2 Nanobelt Field Effect Transistor Utilizing Microwave Atomic Force Microscopy

J212015 Quantitative Evaluation of Conductivity of Metallic Nanowires by Microwave Atomic Force Microscopy

Quantitative Measurement of Submicrometre Electrical Conductivity

Measurement and Simulation of Carbon Nanotube'S Piezoresistance Property by A Micro/Nano Combined Structure

J212025 Fabrication of Nanowire Surface Fastener on Flexible Substrate and Its Electrical and Mechanical Properties

Methodology for Measurement of Submicron Metallic Wire's Local Electrical Conductivity by Applying Four-points AFM Probe Technique

Microwave Atomic Force Microscopy: Quantitative Measurement and Characterization of Electrical Properties on the Nanometer Scale

The Electrical Measurement System of Nanodevices Based on Virtual Instrument

Electrical measurement on individual multi-walled carbon nanotubes

NANOELECTRONICS AND NANOSENSING USING CARBON NANOTUBES

Quality Metrology of Carbon Nanotube Thin Films and Its Application for Carbon Nanotube-Based Electronics

Nanoscale force sensor and actuator with carbon-nanotube network

The low-energy electron point source microscope as a tool for transport measurements of free-standing nanometer scale objects: application to carbon nanotubes

Nanotube TFET Biosensor with High-Frequency FOMs as Sensing Parameter

Fabrication of Carbon Nanotube Diode with Atomic Force Microscopy Manipulation

Detecting Mechanical Resonance in Carbon Nanotubes Via Inter-Tube Electrical Transport Measurements.

A novel method to measure the high-frequency properties of nanomaterials

Force-sensitive Sensor Based on Single-walled Carbon Nanotube Array

Electrical Transport Measurements of Nanotubes with Known (n, M) Indices