Abstract:In order to study the basic properties of pseudoelasticity of a CuAlNi single crystal, an investigation was carried out to observe and analyze the orientation dependence of the stress-induced martensitic transformation. The transformation is the β 1 to β′1 stress-induced transformation in a Cu-13.7 pct Al-4.18 pct Ni (wt pct) alloy. From the uniaxial tension of three groups of differently oriented flat specimens, we obtained a series of stress-strain curves. In addition, the micrograph of martensitic evolution was observed by utilizing a long-focus microscope. It is found that martensite appears in the shape of bands or thin plates on the surface of the specimen. The formation of martensite is a very quick process, and martensite “jumps” out until the specimen is completely transformed into a single variant. The experimental results are analyzed and compared to a constitutive model proposed recently. It is found that the constitutive model cannot describe transformation hardening, since the model ignores the surface-energy change. Nevertheless, the proposed constitutive model cannot only precisely predict the forward and reverse transformation, but can also characterize the stress-strain hysteresis behavior during pseudoelastic deformation under uniaxial tension loading.

Micromechanical Study of Formation and Evolution of Martensite for Cu–Al–Ni Single Crystal by Moiré Interferometry

EXPERIMENTAL INVESTIGATION ON THE STRESS-INDUCED MARTENSITIC TRANSFORMATION AND THE MICROSTRUCTURE EVOLUTION IN CuAlNi SINGLE CRYSTAL

On the Formation of Martensite in Front of Cracks in Pseudoelastic Shape Memory Alloys

Pseudoelastic Behavior of A Cualni Single Crystal under Uniaxial Loading

Microobservation of Stress Induced Martensitic Transformation in CuAlNi Single Crystals

In Situ Study of Martensitic Transformation and Nucleation and Propagation of Cracks in Cu-Ni-Al Shape Memory Alloy

Softening Micromechanical Constitutive Model of Stress Induced Martensite Transformation for NiTi Single Crystal Shape Memory Alloy

In Situ Observation of Thermoelastic Martensitic Transformation of Cu-Al-Mn Cryogenic Shape Memory Alloy with Compressive Stress

Analysis of microstructure evolution during tensile stress induced martensitic transformations

Structural and Phase Transformations and Physical and Mechanical Properties of Cu-Al-Ni Shape Memory Alloys Subjected to Severe Plastic Deformation and Annealing

Quantitative analysis of microstructure evolution in shape memory alloys during martensitic transformation

Martensitic Transformation in Submicron Cu-Al-Ni Pillar

Crystallographic insights into the intermartensitic transformation in Ni–Mn–Ga alloys

In-situ Study of Martensitic Transformation and Nucleation, Propagation of Crack in CuNiAl Shape Memory Alloy

Microstructure, Martensitic Transformation and Shape Memory Effect of Polycrystalline Cu-Al-Mn-Fe Alloys

High resolution electron microscopy studies on the interface structure of deformed stress induced martensite variants in a Ti–Ni–Nb shape memory alloy

Microstructure, Martensitic Transformation And Superelasticity Of T1(49) (6)N1(45 1)Cu(5)Cr(0 3) Shape Memory Alloy

Direct observation of hierarchical nucleation of martensite and size-dependent superelasticity in shape memory alloys.

Investigation on the Deformation of TiNi Shape Memory Alloy with a Crack Using Moiré Interferometry

Crystallographic Correlation Between 5M and 7M Martensite in an Ni–Mn–Ga Alloy

The Relationship Between Martensitic Transformation, Deformation and Microcrack Nucleation in Cu-Ni-Al Alloys