Abstract:Mechanical training via cyclic loading and unloading was widely used in NiMnGa shape memory alloys (SMAs) to create single or double variant states for reducing the resistance to variant reorientation and thus achieving a maximum shape memory strain. In this work, an effort was made to reveal the deformation mechanism of a polycrystalline Ni52Mn27Ga17Co4 high-temperature SMAs consisting of non-modulated (NM) martensite with uniform orientation and surrounding γ precipitates. The NM martensite microstructure was characterized as a self-accommodated hierarchical twinned-structure prior to deformation. Based on the interrupted in-situ EBSD measurements and phase-field simulations, it was demonstrated that the compressive loading resulted in the thickening of the stress-favored variants with the <001>NM direction perpendicular to compression axis at different dimensional scales. The path consisted of two subsequent processes–first detwinning of the nano-lamellae within one micro-variant through inter-lamellae boundary motion, and then reorientation of micro-variants through inter-plate boundary motion. The Schmid factor and preferred orientation of nano-lamellae (or strain accommodation) dominated the entire detwinning/reorientation process of NM martensite. As a result, the hierarchically twinned microstructure almost evolved into a single-variant state with the disappearance of packet boundaries. The ductile γ phase with network structure possessed more excellent strain-accommodated ability to the macroscopic deformation, hence significantly enhancing the mechanical properties including the ultimate compressive strength and elongation of NiMnGa SMAs.

Direct observation of hierarchical nucleation of martensite and size-dependent superelasticity in shape memory alloys.

An in Situ TEM Study of the Size Effect on the Thermally Induced Martensitic Transformation in Nanoscale NiTi Shape Memory Alloy

Synergistic Size–Surface Effects on Martensitic Transformation of Shape Memory Alloy Nanorods for Micro/Nanoelectro-Mechanical Systems

Recent Electron Microscopy Results on Micro- and Nanostructured Ni-Ti-(X) Shape Memory Alloys

Nonhysteretic Superelasticity of Shape Memory Alloys at the Nanoscale.

Thermoelastic martensitic transition and shape memory effect in Ti2NiCu alloy at micro- and nanoscale

Experimental Study of One‐dimensional Superelastic Capability of a Nearly Equi‐atomic NiTi Shape Memory Alloy

Picosecond View Of A Martensitic Transition And Nucleation In The Shape Memory Alloy Mn50ni40sn10 By Four-Dimensional Transmission Electron Microscopy

Martensitic Transformation in Submicron Cu-Al-Ni Pillar

In Situ Observation of Thermoelastic Martensitic Transformation of Cu-Al-Mn Cryogenic Shape Memory Alloy with Compressive Stress

In-situ TOF Neutron Diffraction Studies of Cyclic Softening in Superelasticity of a NiFeGaCo Shape Memory Alloy

Stress-induced martensitic transformation in nanometric NiTi shape memory alloy strips: An in situ TEM study of the thickness/size effect

Stress-induced Crystallographic and Microstructural Evolution for Hierarchically Twinned Martensite in Single- and Dual-Phase Ni-Mn-Ga Alloys

Stress-induced detwinning/reorientation of hierarchically twinned martensite and deformation micro-mechanism in Ni52Mn27Ga17Co4 shape memory alloys: Experimental and phase-field studies

Banded-like Morphology and Martensitic Transformation of Dual-Phase Ni–Mn–In Magnetic Shape Memory Alloy with Enhanced Ductility

Micromechanical Study of Formation and Evolution of Martensite for Cu–Al–Ni Single Crystal by Moiré Interferometry

In Situ Observation on Temperature Dependence of Martensitic Transformation and Plastic Deformation in Superelastic NiTi Shape Memory Alloy

Microstructure, superelasticity and shape memory effect by stress-induced martensite stabilization in Cu–Al–Mn–Ti shape memory alloys

Two Types of Martensitic Phase Transformations in Magnetic Shape Memory Alloys by In-Situ Nanoindentation Studies

In Situ Study of Martensitic Transformation and Nucleation and Propagation of Cracks in Cu-Ni-Al Shape Memory Alloy

In-Situ High-Energy Synchrotron X-Ray Diffraction Study of Micromechanical Behavior of Multiple Phases in Ni47ti44nb9 Shape Memory Alloy