Abstract:Achieving full equilibrium for the horizontal component force of the backstay in cable-stayed arch bridges is challenging, and the stiffness of the buckle tower has a notable influence on the overall shape of the main arch structure. Increased stiffness in the buckle tower leads to reduced construction complexity. Therefore, this study proposed a method of enhancing the longitudinal thrust stiffness of the buckle tower using the joint effect of approach bridges. A sensitivity analysis was conducted on the approach bridge–composite buckle tower structure to determine the optimal combination method, resulting in the formulation of an analytical expression for the thrust stiffness of this structure. In this study, numerical analysis was performed to explore the composition mechanism of the thrust stiffness influenced by the pier–girder connection, and we discussed the applicability of the joint effect of approach bridges during the cantilever assembly process of arch ribs. The following conclusions were obtained: 1) prior to installing the main girder of the approach bridge, when the steel buckle tower and the junction pier have already been secured, the most effective approach is to form a “T” rigid structure by firmly connecting the main girder of the approach bridge with the composite buckle tower. This configuration provides self-weight deflection and pier–girder rotation restriction effects. 2) The study presents analytical formulas for the completely rigid pier–girder connection of the approach bridge–composite buckle tower structure, partially rigid pier–girder connection, and pre-deviation. Combined with the calculation program, this can guide structural design. 3) When a large downward elevation error of the arch ribs occurs in the middle and later stages, the cable force needed to install new arch segments becomes overly large. Therefore, the joint effect of approach bridges can be utilized to substitute for a portion of the cable force, effectively reducing potential elevation errors that might arise in subsequent arch ribs in the absence of this joint effect.

Deviation Analysis on Construction of Steel-Concrete Composite Arch Bridges Caused by Vertical Rotation Construction

Case Study on Stability Performance of Asymmetric Steel Arch Bridge with Inclined Arch Ribs

Numerical Analysis of Ultimate Strength of Concrete Filled Steel Tubular Arch Bridges

Finite-element Analysis for Nonlinear Stabilities of Concrete-filled Steel Tubular Arch Bridges

Approach for Analyzing the Ultimate Strength of Concrete Filled Steel Tubular Arch Bridges with Stiffening Girder

Analysis of Mechanical Behavior of Rotating Hinge for Vertical Rotating Construction of a Steel and Concrete Composite Arch Bridge

THEORETICAL STUDY ON THE IMPACT FACTOR OF CRESCENT-SHAPED MULTI-RIB CONCRETE FILLED STEEL TUBE TRUSS ARCH BRIDGES

Parametric Study of In-Plane Ultimate Bearing Capacity of CFST Truss Rib Arch Bridge

SIMULATION ANALYSIS FOR MECHANIC BEHAVIOR OF CONCRETE-FILLED STEEL TUBULAR ARCH BRIDGE DURING THE COURSE OF CORE CONCRETE PUMPING

Research on Construction Control of Vertical Rotation of Concrete-filled Steel Tubular Basket Arch Bridge

Analysis of Support Abutments of Curved Bridges with Single-pedestal Piers

Stress Performance Analysis of Special-shaped Arch Bridge with Longitudinal Linkage

Test on Forces in Flexible Hanger Rods in Combinatorial Bridges with Beams and Arches

Behaviour Analysis of Prestressed Concrete Deck-Tied Arch Bridge

Strength Optimisation and Static Performance Analysis of Arch Ribs of Steel-tube Concrete Arch Bridge

Construction Control of Hoisting and Installation of Arch Rib of a Half-Through CFST Stiff Skeleton Arch Bridge

The Analysis of the Bearing Capacity of Hoisting Stand Used in Long-Span Steel Truss Arched Bridge

Experimental Analysis of the Lateral Distribution Law of the Concrete Three-Ribbed Arch Bridges

Harnessing the joint effect of approach bridges in arch bridge construction: an analytical study on thrust stiffness and elevation error mitigation

Optimum Design of Large Span Concrete Filled Steel Tubular Arch Bridge Based on Static, Stability and Modal Analysis