Abstract:The 50 m box girders in the tidal flat section of unnavigable channel bridge in Hangzhou Bay Bridge adopt the approach of trolley on the under bridge to transport and erect the girder. Based on the actual working and load conditions, a precise 3D solid FEM simulation model is established by taking account of the space effects of prestressing force, applying equivalent node force and taking reasonable consideration of support details, etc. The values for concrete characteristics are determined according to current specifications for the design of highway bridge. The load is calculated with the consideration of the worst factors. The bottom of the support is simulated as rigid element. Modulus of elasticity for girder contact layer will not appear tensile stress when rotations and deformations occur at girder end. Element mesh should be as subdivided as possible when the structure is discretized. Owing to the relative complexity of the stress at girder end, thicker than span intermediate element mesh is adopted for girder end. The integral deformation and the space stress distribution of weight-bearing box girder are calculated. Results indicate that the deformation is relatively small and the maximum deflection is within the reversed arch because the load is quite close to the support. The maximum main tensile stress of the support section occurs at the side of bottom plank surface, which exceeds concrete cracking strength. Consequently, concrete in this area should be treated and stiffened so as to avoid it from cracking. When the maximum main compressive stress occurs near the stabilizer of girder-erecting machine, its value is less than the compressive strength of concrete.

Test on Forces in Flexible Hanger Rods in Combinatorial Bridges with Beams and Arches

Identification method for tensile force in hanger of arch bridges with damper and its application

An Identification Method For Short Hanger Tension Of Arch Bridges

Estimation of Tension Force in Short Hangers Using Added Mass Method

Fatigue Performance Assessment of Composite Arch Bridge Suspenders Based on Actual Vehicle Loads

Experimental Study and Numerical Analysis of A Composite Bridge Structure

A Method for Identification of Short Hanger Tension Considering Damper

Numerical Analysis of Ultimate Strength of Concrete Filled Steel Tubular Arch Bridges

Investigation of the Fatigue Stress of Orthotropic Steel Decks Based on an Arch Bridge with the Application of the Arlequin Method

TENSION MEASUREMENT FORMULA OF FLEXIBLE HANGER RODS IN TIED-RODS ARCH BRIDGES BASED ON VIBRATION SHAPE FUNCTION OF DEFLECTION CURVE

Approach for Analyzing the Ultimate Strength of Concrete Filled Steel Tubular Arch Bridges with Stiffening Girder

Simulation Analysis of Girder Transport Process on the Box Girder of Hangzhou Bay Bridge

THEORETICAL STUDY ON THE IMPACT FACTOR OF CRESCENT-SHAPED MULTI-RIB CONCRETE FILLED STEEL TUBE TRUSS ARCH BRIDGES

Finite-element Analysis for Nonlinear Stabilities of Concrete-filled Steel Tubular Arch Bridges

Field Test and Analysis for the Static and Dynamic Behaviour of Multi-Box Steel Concrete Composite Girder Bridge

Analysis and Monitor of Hanger Rod Installation by Jacking Tie Beam on Heterotypical Arch Bridge

Study of Dynamic Behavior and Influences Induced by Structural Parameter Variations of Self-Anchored Suspension Bridge

Research on monitoring and control for suspender cable tension of half-through concrete filled steel tube arch bridge

Spatial Analysis of Self-anchored Suspension Bridge and Its Experimental Study

Vortex-Induced Vibration Characteristics and Equivalent Static Force Calculation Method of Circular Steel Hangers on Arch Bridge

Field Test and Theoretic Analysis of an Old Bridge Widened with Steel-Concrete Composite Beams