Abstract:In recent years, the construction of a CFST arch bridge has developed rapidly; however, as a kind of structural system dominated by compression, with the increase of material strength and span, the stability of the main arch of the CFST arch bridge has become more and more important. In this paper, the finite element method is used to analyze the hanger force and the main arch stability of the long-span CFST arch bridge. Combined with the Shenzhen Rainbow Bridge project, the axial force of the hanger, the internal force, and stability of the main arch of the arch bridge are studied. In the establishment of the finite element model, considering the actual operation of the arch bridge, the model simulates the interaction between steel pipe and concrete, it studies the large deformation of CFST arch bridges, and the stress distribution and overall stability of the arch bridge are analyzed. The results show that the main deformation of the CFST arch bridge is the vertical displacement of the deck, and the axial force of most members of the upper arch ribs is greater than that of the lower arch ribs. The axial force and bending moment of the lower arch rib near the arch foot are larger, and the compressive stress of the arch foot is greater than that of other positions. The axial force of the suspender of the arch bridge is the largest at both ends of the hanger and the middle hanger, and the axial force of the other hanger is close to each other, and the axial force changes little under the same case. The buckling modes of the arch are mainly the lateral buckling or flexural buckling of the arch rib outside the plane, which indicates that the vertical stiffness of the arch bridge structure is larger than that of the transverse stiffness. The research results make the load-bearing mechanism of the CFST arch bridge more clear and also provide a certain reference for the design and construction of the CFST arch bridge.

Strength Optimisation and Static Performance Analysis of Arch Ribs of Steel-tube Concrete Arch Bridge

Case Study on Stability Performance of Asymmetric Steel Arch Bridge with Inclined Arch Ribs

Numerical Analysis of Ultimate Strength of Concrete Filled Steel Tubular Arch Bridges

Approach for Analyzing the Ultimate Strength of Concrete Filled Steel Tubular Arch Bridges with Stiffening Girder

Finite-element Analysis for Nonlinear Stabilities of Concrete-filled Steel Tubular Arch Bridges

Comparison Study on Stability Behavior Between Steel Pipe Arch Bridge and CFST Truss Arch Bridge

THEORETICAL STUDY ON THE IMPACT FACTOR OF CRESCENT-SHAPED MULTI-RIB CONCRETE FILLED STEEL TUBE TRUSS ARCH BRIDGES

Parametric Study of In-Plane Ultimate Bearing Capacity of CFST Truss Rib Arch Bridge

SIMULATION ANALYSIS FOR MECHANIC BEHAVIOR OF CONCRETE-FILLED STEEL TUBULAR ARCH BRIDGE DURING THE COURSE OF CORE CONCRETE PUMPING

STUDY FOR IN-PLANE ULTIMATE STRENGTH OF STEEL CIRCULAR ARCHES WITH HORIZONTAL SPRING SUPPORTS

Reinforced Concrete Multi-Rib Arch Bridge Strengthened by Changing Structural System

Multi-rib Arch Bridge Strengthened by Stayed-Cable and Field Test

Analysis on the Ultimate Bearing Capacity of Small Eccentric Compression Component of Steel Tube with Infilled and Outer Concrete

Stress Performance Analysis of Special-shaped Arch Bridge with Longitudinal Linkage

Influence analysis of group studs stiffness in accelerated construction steel-concrete composite small box girder bridges

Research on Hanger Force and Main Arch Stability of Long-Span Concrete-Filled Steel Tube Arch Bridge

Optimum Design of Large Span Concrete Filled Steel Tubular Arch Bridge Based on Static, Stability and Modal Analysis

Experimental and numerical study on slender concrete-filled steel tubular arches subjected to tilting loads

Experimental Investigation into Flexural-Torsional Ultimate Resistance of Steel Circular Arches

Flexural behavior of reinforced concrete arch ribs

Numerical Study on the Mechanical Performance of a Flexible Arch Composite Bridge with Steel Truss Beams over Its Entire Lifespan