Abstract:The 50 m box girders in the tidal flat section of unnavigable channel bridge in Hangzhou Bay Bridge adopt the approach of trolley on the under bridge to transport and erect the girder. Based on the actual working and load conditions, a precise 3D solid FEM simulation model is established by taking account of the space effects of prestressing force, applying equivalent node force and taking reasonable consideration of support details, etc. The values for concrete characteristics are determined according to current specifications for the design of highway bridge. The load is calculated with the consideration of the worst factors. The bottom of the support is simulated as rigid element. Modulus of elasticity for girder contact layer will not appear tensile stress when rotations and deformations occur at girder end. Element mesh should be as subdivided as possible when the structure is discretized. Owing to the relative complexity of the stress at girder end, thicker than span intermediate element mesh is adopted for girder end. The integral deformation and the space stress distribution of weight-bearing box girder are calculated. Results indicate that the deformation is relatively small and the maximum deflection is within the reversed arch because the load is quite close to the support. The maximum main tensile stress of the support section occurs at the side of bottom plank surface, which exceeds concrete cracking strength. Consequently, concrete in this area should be treated and stiffened so as to avoid it from cracking. When the maximum main compressive stress occurs near the stabilizer of girder-erecting machine, its value is less than the compressive strength of concrete.

The Analysis of the Bearing Capacity of Hoisting Stand Used in Long-Span Steel Truss Arched Bridge

Analysis of Bearing Capacity of Hoisting Stand Used in Long-Span Steel Truss Arched Bridge

Case Study on Stability Performance of Asymmetric Steel Arch Bridge with Inclined Arch Ribs

Stability Analysis of Yinxian Second Bridge

Approach for Analyzing the Ultimate Strength of Concrete Filled Steel Tubular Arch Bridges with Stiffening Girder

Simulation Analysis of Girder Transport Process on the Box Girder of Hangzhou Bay Bridge

Parametric Study of In-Plane Ultimate Bearing Capacity of CFST Truss Rib Arch Bridge

Stability Analysis ofLong-span Crossed-arch Latticed Structure

Analysis and Monitor of Hanger Rod Installation by Jacking Tie Beam on Heterotypical Arch Bridge

Stress Performance Analysis of Special-shaped Arch Bridge with Longitudinal Linkage

Multi-rib Arch Bridge Strengthened by Stayed-Cable and Field Test

Ultimate behavior of long-span steel arch bridges

Field Test and Analysis for the Static and Dynamic Behaviour of Multi-Box Steel Concrete Composite Girder Bridge

Wind-induced Load Capacity Analysis and Parametric Study of a Long-Span Steel Arch Bridge under Construction

Analysis of stability of long-span concrete filled steel tube arched bridge in construction

Stability analysis of the steel structure of tianjin bengbu bridge

Behaviour Analysis of Prestressed Concrete Deck-Tied Arch Bridge

Nonlinear Stability Analysis of Long-span CFST Arch Bridge

Stability Analysis on Concrete Filled Steel Tube Truss Arch Bridge with Consideration of Lateral Load

Stress and deformation analysis of the steel pipe arch integral lifting construction process of a continuous beam arch bridge

Analysis of the Existing Reinforced Concrete Rigid Frame Arch Bridge Strengthened with Arch and Cable System