Abstract:Ductile-regime machining has been used to generate damage-free surface of hard and brittle materials by setting the cutting depth to be smaller than the ductile-brittle transition depth (DBTD). However, the ductile-regime cutting of sapphire remains challenging owing to its extreme hardness, small DBTD, serious surface fractures, and severe tool wear. To solve this problem, ion implantation-assisted elliptical vibration cutting (Ii-EVC) has been proposed in this study to enhance the machinability of hard and brittle materials. Taking sapphire as an example, high-energy phosphorus ions were implanted into the workpiece to modify its surface. Nanoindentation tests revealed that the modified materials undergo plastic and elastic deformation more easily due to the decrease in hardness and modulus. Compared with nanocutting without implantation assistance, the DBTD of implanted sapphire has been increased by more than five times. The advantageous effects of Ii-EVC achieve great enhancement in machinability, including surface fractures suppression, tool-wear reduction, chips morphology transformation from discontinuous to continuous, and cutting force decrease. Furthermore, even near the cracks in the brittle region after Ii-EVC, the subsurface microstructure showed a more complete lattice arrangement and a strain distribution close to zero, indicating that crack propagation was effectively suppressed. Due to the promoted localized plastic deformation, the stress distribution in the implanted material is much smaller than that in pristine workpiece. Implantation-induced defects not only serve as a core for absorbing external energy from the high-frequency vibration and improving the in-grain deformation but also facilitate the formation of shear bands. The interface with high distortion between the modified layer and substrate can effectively dissipate strain energy and hinder crack propagation to the free surface. The turning experiments verified that Ii-EVC can achieve better surface quality, less tool wear and higher optical transmittance. Overall, Ii-EVC addresses the challenges of tool breakage and surface fracture caused by high-frequency collision between tool and workpiece in traditional EVC, overcomes the problem of limited modification depth in ion implantation, and increases the ductile-regime removal depth of extremely hard and brittle materials to several microns. Such findings demonstrate that Ii-EVC is a promising method for the ultra-precision manufacturing of advanced materials.

Surface Modification for Brittle Monocrystalline Materials by MeV Ions

Subsurface damage and brittle fracture suppression of monocrystalline germanium in ultra-precision machining by multiple ion implantation surface modification

Mechanical properties and indentation-induced phase transformation in 4H–SiC implanted by hydrogen ions

Modification Mechanism of Collaborative Ions Implanted into 4H-Sic by Atomic Simulation and Experiment

Nanostructure evolution and surface modification mechanism of Cr ion-implanted single-crystal iron: insights from molecular dynamics simulations

Investigation on the Material Removal Mechanism in Ion Implantation-Assisted Elliptical Vibration Cutting of Hard and Brittle Material

Nano-cutting mechanism of ion implantation-modified SiC: reducing subsurface damage expansion and abrasive wear

Surface Morphology Of He-Implanted Single-Crystalline Silicon

Improvement mechanism of brittle-plastic transition and residual stress in scratching 4H-SiC implanted by hydrogen ions

MD simulation study on the microstructural evolution of single-crystal Fe with pre-existing defects by Cr ion implantation

Surface Engineering of A Zr-Based Bulk Metallic Glass with Low Energy Ar- or Ca-Ion Implantation

Surface modification of metals using high-frequency low-voltage plasma immersion ion implantation

Modelling Nano-Indentation of Ion-Irradiated FCC Single Crystals by Strain-Gradient Crystal Plasticity Theory

High Current Ni- and Fe-ion Implantation into an Al Surface to Modify the Mechanical Properties

Mechanical Properties and Structure Evolution of Single-Crystalline Silicon Irradiated by 1 MeV Au+ and Cu+ Ions

Effects of Ion Irradiation on Structural and Mechanical Properties of Crystalline Fe/amorphous SiOC Nanolaminates

Structure and Tribological Behavior of Amorphous Carbon Films Implanted with Cr+ Ions

Behaviour Of Mevva Metal Ion Implantation For Surface Modification Of Materials

Surface Modification of Non-Semiconductors by Ion Beams in China

Surface Modification Technique of Structural Ceramics: Ion Implantation-Assisted Multi-Arc Ion Plating

Investigation on the Machining Mechanism of Silicon Modified by Au Ion Irradiation in Elliptical Vibration Diamond Cutting