Abstract:Two compositions Ce0.50Zr0.39La0.04Y0.07O2−δ and Ce0.25Zr0.65La0.04Y0.06O2−δ based on ceria-zirconia solid solutions were prepared as nanopowders using a continuous hydrothermal flow synthesis reactor, followed by either freeze-drying or hotplate-drying of the slurry. Each dried nanopowder was then subjected to 10h heat-treatment at 1000°C, 1100°C or 1200°C in air (to simulate accelerated ageing). The reducibility and hydrogen consumption of the oxidised samples were measured using temperature programmed reduction (TPR) up to 1000°C. The effects of composition, drying method and heat-treatment temperature were evaluated on the TPR profiles of the materials. The powders were further investigated using a range of analytical methods including UV/Vis spectroscopy (which yielded colour data), Raman spectroscopy, powder X-ray diffraction, BET surface area measurements and X-ray photoelectron spectroscopy (XPS). Chemometric methods were used to investigate relationships between the spectroscopic and total oxygen storage capacity (OSC) data. Principal component analysis (PCA) was used to provide a simple interpretation of the effects of various synthesis and treatment parameters on Raman spectra. Principal component regression (PCR) was used to build regression models relating the Raman spectra and the temperature of hydrogen consumption peak at several set temperatures in the TPR. The total hydrogen consumption of the materials was generally high, while the drying and heat-treatment conditions appeared to have a significant effect on the final properties of the resulting powders, such as the surface area and total oxygen storage capacity.

Preparation of CeO2-La2O3-ZrO2 Ceramic Powder by Chemical Precipitation Method

Preparation, Characterization, And Thermophysical Properties Of (La0.95sr0.05)(2)Ce2o6.95 Ceramic For Thermal Barrier Coatings

Synthesis of PbZrO3 Powder by a COprecipitation Method

Preparation of CaZr_4(PO_4)_6 powder by direct co-precipitation method

Synthesis and coating properties of (La 0.5 Eu 0.25 Y 0.25 ) 2 Zr 2 O 7 ceramic powder

Synthesis and Characterization of Doped Nano-Sized Ceria–zirconia Solid Solutions

Effects of co-precipitation temperature on structure and properties of La and Y doped cerium zirconium mixed oxides

Controllable synthesis of (Ba0.85Ca0.15)(Zr0.1Ti0.9)O3 submicron sphere by hydroxide co-precipitation method

Characterization and Preparation of (Ce-Zr)ma1-mo2 Composite Oxides

Preparation of Zirconia Powders by Sol-gel Process

Ball milling assisted preparation of nano La–Y/ZrO2 powder ternary oxide system: Influence of doping amounts

Effect of Calcination Temperature on the Microstructure, Composition and Properties of Agglomerated Nanometer CeO2-Y2O3-ZrO2 Powders for Plasma Spray-Physical Vapor Deposition (PS-PVD) and Coatings Thereof

Preparation of (Ti0.2Zr0.2Hf0.2Nb0.2Ta0.2)C high‐entropy ceramic nanopowders via liquid‐phase precursor

Achieving the synergy of low thermal conductivity and superior mechanical properties of Ce doping La2Zr2O7 ceramics for thermal protection coatings: Experiment and first-principles calculations

Preparation and Characterization of Ceria-Zirconia Ceramics Using a Sol-Gel Process

Preparation of PLZT Powders from Oxides Via High-Energy Ball Milling Process

Preparation of Composite Additives Powder by Coprecipitation Method and Investgation of ZnO Varistor Ceramics

A simple and low-cost method of preparing CoFe2O4/Ba0.85Ca0.15Zr0.1Ti0.9O3 composite ceramics

Co-precipitation of nano Mg–Y/ZrO2 ternary oxide eutectic system: Effects of calcination temperature

Study on the process and properties of nano-sized polycrystal zirconia powders by co-precipitation in super-alkaline medium

Low-Temperature Preparation of Dense 10 Mol%-Y2o3-Doped Ceo2 Ceramics Using Powders Synthesized Via Carbonate Coprecipitation