Abstract:Purpose: High purity, fine crystalline, degradation-free at low temperature powders have attracted special interest in CAD/CAM prosthetic dentistry full ceramic restorations. This study reports the preparation and characterisation of zirconia-ceria (0.9 ZrO2 0.1 CeO2) powders. Materials were obtained from zirconium-n-alkoxide and cerium nitrate hexahydrate in the pH 2-4 and 8-10. Methods: Zirconia- ceria powders were obtained with the sol-gel method in a humid-free environment. Thermal analysis (TGA/DTA) of the as-prepared materials was made for an assessment of its behaviour at elevated temperatures. Specimens were dried at 80 °C and calcinated in two stages: at 300 °C with soaking time 2.5 h and 850 °C with holding time 2.5 h, in order to evaluate the phase transformations. Thermal analyses of the as-dried powders were made for an assessment of its thermal behaviour during heat treatment up to 1000 °C. By X-ray diffraction (XRD), polymorphs of ZrO2 were identified. Additionally, scanning electron microscopy (SEM) and laser particle size distribution (PSD) were involved for characterisation of morphology of the powders. Results: A correlation between the pH of the colloidal system and the morphology of the as-obtained powders were found. Based on analysis (SEM, PSD), structures were identified known as soft and hard agglomerates. Conclusions: It can be stated that differences found between powder morphology were dependent on the value pH used, which can be crucial for powder densification during sintering and compacting green bodies which, as a consequence, may be crucial for the lifetime of zirconia prostheses. Correlations between phase composition and pH are difficult to grasp, and require further, more sophisticated, studies.

Preparation and Characterization of Ceria-Zirconia Ceramics Using a Sol-Gel Process

Preparation and Characterization of Ceria-Zirconia Mixed Oxide

Electrical Properties of ZrO 2 -Ceo 2 at Intermediate Temperatures

Synthesis and Characterization of Doped Nano-Sized Ceria–zirconia Solid Solutions

Crystallization Kinetics and Dielectric Properties in Sol-Gel Derived (Pb,la)(zr,sn,ti)o-3 Ceramics

Preparation of Ce-Doped (ba0.87sr0.04ca0.09)(ti0.90zr0.04sn0.06)o3 Nano-Crystalline Powders and Ceramics Using the Sol-Gel Method, and Their Dielectric Properties

Preparation and Characterization of Ceria-based Solid Electrolyte Via Sol-gel Method

Effects of ceria/zirconia ratio on properties of mixed CeO2-ZrO2-Al2O3 compound

Synthesis and Characterization of Mesostructured Ceria-Zirconia Solid Solution

Transparent ion-conducting ceria-zirconia films made by sol–gel technology

Characterization of Cerium-Zirconium Solid Solutions Prepared by the Microwave-Assisted Approach

Preparation of Ceria-Zirconia Solid Solution by Urea-Based Hydrothermal-Copricipitation Method and its Catalytic Application

Synthesis, Characterization and Thermal Stability of CeO2 Stabilized ZrO2 Ultra Fine Nanoparticles Via a Sol-Gel Route

Preparation and characterization of Sol-Gel derived PZT bulk ceramics and thin films

Preparation of Zirconia Thin Films Via Sol-Gel Process from Inorganic Precursor

Phase composition and morphology characteristics of ceria-stabilized zirconia powders obtained via sol-gel method with various pH conditions

Preparation of High Oxygen Storage Capacity and Thermally Stable Ceria–zirconia Solid Solution

Preparation of ceria-zirconia solid solution with enhanced oxygen storage capacity and redox performance

Catalytic Activity of Ceria-Zirconia Nanostructured Materials Prepared Via Reversed Microemulsion Method

Preparation and Characterization of CeO_2-ZrO_2 Solid Solutions Prepared by Citric Acid Sol-Gel Method

Electrical Properties of Nanocrystalline CeO 2 –Y 2 O 3 Thin Films Prepared by the Sol-Gel Method