Abstract:Two compositions Ce0.50Zr0.39La0.04Y0.07O2−δ and Ce0.25Zr0.65La0.04Y0.06O2−δ based on ceria-zirconia solid solutions were prepared as nanopowders using a continuous hydrothermal flow synthesis reactor, followed by either freeze-drying or hotplate-drying of the slurry. Each dried nanopowder was then subjected to 10h heat-treatment at 1000°C, 1100°C or 1200°C in air (to simulate accelerated ageing). The reducibility and hydrogen consumption of the oxidised samples were measured using temperature programmed reduction (TPR) up to 1000°C. The effects of composition, drying method and heat-treatment temperature were evaluated on the TPR profiles of the materials. The powders were further investigated using a range of analytical methods including UV/Vis spectroscopy (which yielded colour data), Raman spectroscopy, powder X-ray diffraction, BET surface area measurements and X-ray photoelectron spectroscopy (XPS). Chemometric methods were used to investigate relationships between the spectroscopic and total oxygen storage capacity (OSC) data. Principal component analysis (PCA) was used to provide a simple interpretation of the effects of various synthesis and treatment parameters on Raman spectra. Principal component regression (PCR) was used to build regression models relating the Raman spectra and the temperature of hydrogen consumption peak at several set temperatures in the TPR. The total hydrogen consumption of the materials was generally high, while the drying and heat-treatment conditions appeared to have a significant effect on the final properties of the resulting powders, such as the surface area and total oxygen storage capacity.

Low-Temperature Preparation of Dense 10 Mol%-Y2o3-Doped Ceo2 Ceramics Using Powders Synthesized Via Carbonate Coprecipitation

Preparation, Characterization, And Thermophysical Properties Of (La0.95sr0.05)(2)Ce2o6.95 Ceramic For Thermal Barrier Coatings

Sintering and electrical properties of coprecipitation prepared Ce0.8Y0.2O1.9 ceramics

Preparation and Properties of Ce0.8Y0.2O1.9 Electrolyte

Low-temperature Solution Synthesis and Characterization of Ce-doped YAG Nanoparticles

Synthesis and Characterization of Doped Nano-Sized Ceria–zirconia Solid Solutions

Synthesis of Nanocrystalline Ce<sub>0.8</sub>Sm<sub>0.2</sub>O<sub>1.9</sub> by Citrate Gel Method

Polyvinyl alcohol-induced low temperature synthesis of CeO2-based powders

Preparation of Discrete Nanosize Ceria Powder

Synthesis of Ce<sub>0.8</sub>Gd<sub>0.05</sub>Y<sub>0.15</sub>O<sub>1.9</sub> Nanopowders

Novel Mesoporous and Multilayered Yb/N-Co-Doped CeO2 with Enhanced Oxygen Storage Capacity

Synthesis of Nanocrystalline Ce0.8sm0.2o1.9 by Citrate Gel Method

Synthesis of nanocrystalline Ce0.8Sm0.2O 1.9 by citrate gel method

Novel Azeotropic Distillation Process for Synthesizing Nanoscale Powders of Yttria Doped Ceria Electrolyte

Fabrication and Characterization of CeO2-Doped Yttria-Stabilized ZrO2 Composite Particles

Hydrothermal synthesis of CeO2 nano-particles

Direct Preparation Of Ce0.8sm0.2o1.9 Powders Oxidized With H2o2 For Low Temperature Sofcs Application

Synthesis of Y2O3 nanopowders and transparent Y2O3 ceramics by carbonate-precipitation process

Synthesis of Ce0.8Gd0.05y0.15O 1.9 nanopowders

Synthesis of Cerium(IV) Oxide Ultrafine Particles by Solid‐State Reactions

Preparation of dense mixed electron- and proton-conducting ceramic composite materials using solid-state reactive sintering: BaCe0.8Y0.1M0.1O3−δ–Ce0.8Y0.1M0.1O2−δ (M=Y, Yb, Er, Eu)