Abstract:Y2O3 nanomaterials have been widely used in transparent ceramics and luminescent devices. Recently there are many studies focusing on controlling the size and morphology of Y2O3 in order to obtain better materials performance. In present study, yttrium oxyhydroxide precursor was synthesized via a facile solvothermal process through the dissolution-recrystallization mechanism of Y2O3 raw powders in the ethylenediamine solvent, then nanosized yttrium oxide crystal was prepared from the precursor through post heat treatment process. The effects of solvothermal treatment temperature, holding time, solvent kinds and post heat treatment parameters on crystalline structure, grain shape and size of nanocrystal were investigated by XRD, TEM and TGA-DTA measurements. TEM images reveal that the morphology of product after post heat treatment at 460 °C for 12 h is rice-like nanocrystal. XRD shows that this product is pure cubic Y2O3 cphase. Present study reveals that high purity Y2O3 with rice-like morphology can be easily prepared with average size around 30 nm under suitable post heat treatment parameters. In addition the effects of solvents such as water and ethanol etc. on the crystal structure and morphology were also investigated. It is suggested that dissolution-recrystallization process may be the main mechanism for the formation of nano-sized YOOH precursors under solvothermal reaction condition, and the ethylenediamine solvent is likely to play an important role in controlling the transformation process of yttria precursors to the Y2O3 nanocrystal.

Synthesis of Y2O3 nanopowders and transparent Y2O3 ceramics by carbonate-precipitation process

Synthesis of Yttria Nanopowders for Transparent Yttria Ceramics

A Novel Spray Co-Precipitation Method to Prepare Nanocrystalline Y 2 O 3 Powders for Transparent Ceramics

Synthesis of Nd3+ Doped Nano-Crystalline Yttrium Aluminum Garnet (YAG) Powders Leading to Transparent Ceramic

Study on Preparation of Yttrium Oxide with Large Particle Sizes and Spherical Shapes by Precipitation with Ammonium Bicarbonate

Synthesis of Submicron-Sized Spherical Y2O3 Powder for Transparent YAG Ceramics

Synthesis of yttria nanopowder with poly acrylic acid as dispersant for highly transparent yttria ceramics

Synthesis of Yttrium Oxide Nanocrystal Via Solvothermal Process

Achieving fabrication of highly transparent Y 2 O 3 ceramics via air pre‐sintering by deionization treatment of suspension

Optimizing co-precipitated Nd:YAG nanopowders for transparent ceramics

Fabrication, microstructure and properties of transparent Yb:Y2O3 ceramics from co-precipitated nanopowders

Simultaneous precipitation of Zr4+ and Y3+ ions induced refinement of precursors and powders in fabrication of Zr4+ doped Y2O3 transparent ceramics

Preparation of ultra-fine yttrium oxide by ultrasonic-quenching-homogeneous precipitation method

Fabrication and microstructure evolution of 8 mol% yttria-stabilized zirconia (8YSZ) transparent ceramics from co-precipitated nanopowders

Densification of Zirconia Doped Yttria Transparent Ceramics Using Co-Precipitated Powders

Co-Precipitation of YAG Powders for Transparent Materials: Effect of the Synthesis Parameters on Processing and Microstructure

Recent Progress in Synthesis of YAG Powders by Chemical Precipitation Method for Transparent Ceramics

Co-precipitation of nano Mg–Y/ZrO2 ternary oxide eutectic system: Effects of calcination temperature

Ethanol-induced formation of precursor for 8mol% Yttria-stabilized zirconia: Towards the production of well-dispersed, easily sintering, and high-conductivity nano-powders

Low-Temperature Preparation of Dense 10 Mol%-Y2o3-Doped Ceo2 Ceramics Using Powders Synthesized Via Carbonate Coprecipitation

Ultrasonic Spray Co-Precipitation for YAG Nano-Powders Preparation