Abstract:Hierarchical twin lamellae in polycrystalline face-centered cubic (fcc) metals possess a possibility to achieve higher strength with keeping an acceptable elongation. The present work is concerned with the analysis of twin spacing and grain size-dependent plastic performance in hierarchically nanotwinned fcc metals using a generalized strain-gradient plasticity model. The dislocation density-based physical model for constitutive description of nanotwinned fcc metals is expanded for the hierarchical structures of nanotwins. The strengthening mechanism and the failure behavior in these hierarchical nanostructures are studied to evaluate the strength and ductility. Moreover, the transition twin spacing between the strengthening and softening is obtained in different order of twin lamellae. A dislocation-based model on nucleating deformation twins is presented to predict the critical twin spacing in the lowest twin lamellae for generating the subordinate twin lamellae. Our simulation results demonstrate that the existence of the hierarchical nanotwins gives rise to a significant enhancement in the strength, and the resulting global flow stresses are sensitive to the twin spacings of the hierarchical twin lamellae and the grain size. Two softening stages are observed with variation of twin spacing, and the relevant transition twin spacing depends on the microstructural size in hierarchically nanotwinned metals. We further find that the predicted failure strain decreases with decreasing the twin spacing, which is quite different from the case of the individually nanotwinned fcc metals. The critical twin spacing for generating subordinate twins also depends on the twin spacing of superordinate twin lamellae and the grain size. These findings suggest that the high yield strength and good ductility can be achieved by optimizing the grain size and the twin spacings in the hierarchical twins.

Influence of Grain Size on the Density of Deformation Twins in Cu–30%Zn Alloy

Modeling Grain Size Dependent Optimal Twin Spacing for Achieving Ultimate High Strength and Related High Ductility in Nanotwinned Metals

Size-Dependent Dislocation-Twin Interactions

The Direct and Indirect Effects of Nanotwin Volume Fraction on the Strength and Ductility of Coarse-Grained Metals

Tuning the Strength-Ductility Synergy of Nanograined Cu Through Nanotwin Volume Fraction

On the Role of Hierarchical Twins for Achieving Maximum Yield Strength in Nanotwinned Metals

Alloying Effect on Grain-Size Dependent Deformation Twinning in Nanocrystalline Cu–Zn Alloys

Grain Size Dependence of Twin Nucleation in Magnesium Alloys

Grain Size Effect on Deformation Twinning and De-Twinning in A Nanocrystalline Ni-Fe Alloy

Grain-Size-Dependent Zero-Strain Mechanism for Twinning in Copper

Twin Spacing and Grain Size Dependent Tensile Deformation Mechanism of a Nano-Ploycrystalline Ni-based Alloy

Statistical Analysis Of Grain-Scale Effects Of Twinning Deformation For Magnesium Alloys Under Cyclic Strain Loading

Grain Size and Specimen Thickness Effects on Twinning Behaviors in High Strain Rate Deformation of Ultra-Thin Pure Titanium Sheet

Grain size effect on deformation twinning and detwinning

Grain Size Effect of V-shaped Multiple Twins in Annealed Nanocrystalline Cu

Double-inverse Grain Size Dependence of Deformation Twinning in Nanocrystalline Cu

Effect of Grain Size on the Competition Between Twinning and Detwinning in Nanocrystalline Metals

Influences of grain size and twin boundary on the tensile properties of nanocrystalline face-centered cubic Cu50Ni50 alloy

Analysis of the Twin Spacing and Grain Size Effects on Mechanical Properties in Hierarchically Nanotwinned Face-Centered Cubic Metals Based on A Mechanism-Based Plasticity Model

Study on the factors influencing the mechanical properties of bimodal nanotwinned Cu-Ag alloys

Twinning/detwinning-mediated Grain Growth and Mechanical Properties of Free-Standing Nanotwinned Ni Foils: Grain Size and Strain Rate Effects