Abstract:This study focuses on the deformation mechanisms of nanotwinned Cu with hierarchical twins (HTs) by virtue of a series of large-scale molecular dynamics (MD) simulations. For the same grain size d(G) and the same secondary twin spacing L-2, two softening stages and one strengthening stage are discovered, accompanied by the reduction of the primary twin spacing L-1. This special phenomenon is firstly found in nanotwinned Cu with HTs by MD simulations. In addition, totally different deformation mechanisms are observed along with the variation of L-1: (1) The transition of full dislocation to partial dislocation-dominated plastic deformation as the primary twin spacing L-1 decreases until L-1 reaches the first critical primary twin spacing [GRAPHICS] in the first softening stage. (2) The transition of partial dislocation to dislocation blockage-dominated plastic deformation leads to strengthening when the primary twin spacing L-1 is between the first critical primary twin spacing and second critical primary twin spacing [GRAPHICS] and [GRAPHICS] in the strengthening stage. (3) Partial dislocations parallel to the twin boundaries (TBs), detwinning and partial dislocation motion-induced thickening/thinning of TBs result in the second softening stage when the primary twin spacing L-1 is smaller than the second critical primary twin spacing [GRAPHICS] .

Double-inverse Grain Size Dependence of Deformation Twinning in Nanocrystalline Cu

Two softening stages in nanotwinned Cu

Size-Dependent Dislocation-Twin Interactions

Modeling Grain Size Dependent Optimal Twin Spacing for Achieving Ultimate High Strength and Related High Ductility in Nanotwinned Metals

Grain-Size-Dependent Zero-Strain Mechanism for Twinning in Copper

Deformation Twinning in Nanocrystalline Copper at Room Temperature and Low Strain Rate

Grain orientation dependence of deformation twinning in pure Cu subjected to dynamic plastic deformation

Grain Size Effect on Deformation Twin Thickness in a Nanocrystalline Metal with Low Stacking-Fault Energy

Delay of inverse Hall-Petch relationship of nanocrystalline Cu by modifying grain boundaries with coherent twins

Grain size effect on deformation twinning and detwinning

Grain Size Effect on Deformation Twinning and De-Twinning in A Nanocrystalline Ni-Fe Alloy

Size Dependence and Associated Formation Mechanism of Multiple-Fold Annealing Twins in Nanocrystalline Cu

Inverse grain-size effect on twinning in nanocrystalline Ni

Alloying Effect on Grain-Size Dependent Deformation Twinning in Nanocrystalline Cu–Zn Alloys

Influences of grain size and twin boundary on the tensile properties of nanocrystalline face-centered cubic Cu50Ni50 alloy

A Disclination Model for Twinning and De-Twinning of Nanotwinned Copper

Twin Boundary and Grain Boundary Effects on Cyclic Responses of Tensile Pre-Deformed Highly Oriented Nanotwinned Cu: Molecular Dynamics Simulation

Cross-over of the Plasticity Mechanism in Nanocrystalline Cu

Grain Coarsening in Nanocrystalline Copper with Very Small Grain Size During Tensile Deformation

Deformation Twinning Mechanism and Its Effects on the Mechanical Behaviors of Ultrafine Grained and Nanocrystalline Copper