Abstract:In this dissertation, the relationships between structure-mechanical properties-deformation mechanisms in face-centered cubic (FCC) and body-centered cubic (BCC) metallic nanowires have been studied using in situ TEM nanomechanical testing. It is well known that smaller is stronger and the widely-observed size effect is believed to arise from dislocation interactions inside nanocrystals. However, the interaction mechanisms in small-volume nanocrystals remain unexplored. Here, it was found that surface-nucleated dislocations can strongly interact inside the confined volume of Au nanowires, which led to a new type of dislocation-originated stacking fault tetrahedra (SFT), at variance to the widely-believed vacancy-originated SFT. The atomic-scale processes of nucleation, migration and annihilation of dislocation-originated SFT were revealed, shedding new light onto the strain hardening and size effect in small-volume materials. Although nanoscale twinning is an effective mean to enhance the strength of metals, twin-size effect on the deformation and failure of nanotwinned metals remains largely unexplored, especially at the minimum twin size. Here, a new type of size effect in nanotwinned Au nanowires is presented. As twin size reaches the angstrom-scale, Au nanowires exhibit a remarkable ductile-to-brittle transition that is governed by the heterogeneous-to-homogeneous dislocation nucleation transition. Quantitative measurements show that approaching such a nanotwin size limit gives rise to the ultra-high strength in Au nanowires, close to the ideal strength limit of perfect Au. Twinning is a fundamental deformation mode that competes against dislocation slip in crystals. At the nanoscale, higher stresses are required for plastic deformation than that in bulk, which favors twinning over dislocation slip. Indeed, deformation twinning has been well-documented in FCC nanocrystals. However, it remains unexplored in BCC nanostructures. Here, it shows that twinning is the dominant deformation mode in BCC-tungsten nanocrystals. A competition between twinning and dislocation slip occurs when changing the loading orientations, attributed to the defect growth controlled plasticity in BCC nanocrystals. Several important commonalities and differences in FCC and BCC nanocrystals deforming at nanoscale are further proposed. The results from this dissertation advance fundamental understanding of plastic deformation in a broad class of metals and alloys, and are of technological importance for degradation control and future design of ultra-strength nanomaterials.

Grain Size Effect on Deformation Twinning and De-Twinning in A Nanocrystalline Ni-Fe Alloy

Size-Dependent Dislocation-Twin Interactions

In Situ TEM Study on the Nanomechanical Behaviors of Metallic Nanowires

Refining Micron-Sized Grains to Nanoscale in Ni-Co Based Superalloy by Quasistatical Compressive Deformation at High Temperature

Effect of Grain Size on the Competition Between Twinning and Detwinning in Nanocrystalline Metals

A Molecular Dynamics Study on Mechanical Performance and Deformation Mechanisms in Nanotwinned NiCo-based Alloys with Nano-Precipitates under High Temperatures

Grain size effect on deformation twinning and detwinning

Twin Spacing and Grain Size Dependent Tensile Deformation Mechanism of a Nano-Ploycrystalline Ni-based Alloy

Deformation Twinning Mechanisms in Nanocrystalline Ni

Alloying Effect on Grain-Size Dependent Deformation Twinning in Nanocrystalline Cu–Zn Alloys

Twinning/detwinning-mediated Grain Growth and Mechanical Properties of Free-Standing Nanotwinned Ni Foils: Grain Size and Strain Rate Effects

Dislocations and twins in nanocrystalline Ni after severe plastic deformation: the effects of grain size

Statistical Analysis Of Grain-Scale Effects Of Twinning Deformation For Magnesium Alloys Under Cyclic Strain Loading

Deformation twinning in ultra-fine grained Ni at room temperature and low strain rate

Double-inverse Grain Size Dependence of Deformation Twinning in Nanocrystalline Cu

Grain Size Dependence of Twin Nucleation in Magnesium Alloys

Strong size effect on deformation twin-mediated plasticity in body-centered-cubic iron

Investigation of nanotwins in the bimodal-structured Fe22Co22Ni20Cr22Mn14 alloy subjected to high-strain-rate deformation at cryogenic temperatures

Effect of twin spacing on the mechanical behavior and deformation mechanism of nanotwinned Al

Deformation Twinning In Nanocrystalline Aluminum

Grain Size Effects on Microstructural Stability and Creep Behaviour of Nanotwinned Ni Free-Standing Foils at Room Temperature