Abstract:By conducting combustion synthesis in high-gravity field, the solidified TiC-TiB2 with a series of TiB2 mole content were prepared through adjusting the mole ratio of C and B elements in combustion system. XRD, FESEM and EDS results showed that with increasing TiB2 mole content, the matrix of TiC-TiB2 composite ceramics transformed a number of fine TiB2 platelets from the TiC spherical grains, and fine-grained even ultrafine-grained microstructures were achieved in solidified TiC-50%TiB2 due to the coupled quasi-eutectic growth under rapid solidification of the ceramic. Properties showed that relative density, Vickers hardness and flexural strength of TiC-50%TiB2 simultaneously reached the maximum values of 98.7%, 21.5 +/- 1.5 GPa and 860 +/- 35 MPa, whereas the maximum fracture toughness of 13.5 +/- 1.5 MPa m(0.5) was achieved in TiC-66.7%TiB2. FESEM fractography analyses of the solidified ceramics indicated that the highest flexural strength achieved in TiC-50%TiB2 benefits from not only the lowest content of Al2O3 inclusions and Cr-W-Ti borides, but also the achievements of fine-grained microstructure in the near-full-density ceramic and high fracture toughness contributed from a intensive coupled mechanism of crack deflection, crack-bridging and pull-out by a large number of fine TiB2 platelets. (C) 2012 Elsevier B.V. All rights reserved.

Fast Shape Evolution of Tin Microcrystals in Combustion Synthesis

Dynamically Controlled Formation of Tin by Combustion of Ti in Air

Rapid-Heating-Triggered in Situ Solid-State Transformation of Amorphous TiO2 Nanotubes into Well-Defined Anatase Nanocrystals

Nucleation on Thermal History and Microstructural Evolution of Atomized Ti-48Al Nano and Micro-Powders

Combustion Synthesis of Tinxc1-X Powders with Ultra Fine Particle Size by Using Titanium Oxide As Dilution

Mechanosynthesis Mechanism of Tic Powders

Microstructural Evolution in the Combustion Synthesis of Titanium Carbide

Formation Mechanism of Spherical TiC in Ni-Ti-C System during Combustion Synthesis

Microstructural evolution of the titanium particles in the in-situ composition of TiC–Fe by the combustion synthesis

Combustion Synthesis Of Tin Ceramic Powder And Parts

Combustion Synthesis of NiAl/TiC Multiphase Composites and their Related Microstructure

Structure Formation in the Combustion Synthesis of Al2O3–TiC Composites

Combustion Synthesis of Ti(C,N) Powder

Microstructure of TiNi shape-memory alloy synthesized by explosive shock-wave compression of Ti–Ni powder mixture

Layered growth of Ti2AlC and Ti3AlC2 in combustion synthesis

Microstructural evolution during combustion synthesis of TiC-Fe cermet

MICROSTRUCTURE OF Si3N4-TiN-SiC CERAMICS DURING COMBUSTION SYNTHESIS PROCESS

Growth Morphology and Solidification Behavior of In-Situ Synthesized TiN and TiB

Surface Characteristics and Microstructure of Dispersed Tio2 Nanoparticles Prepared by Diffusion Flame Combustion

Growth Mechanism of Crystalline Sialon Microtubes Prepared by Combustion Synthesis

Microstructure Transformation and Mechanical Properties of TiC–TiB2 Ceramics Prepared by Combustion Synthesis in High Gravity Field