Abstract:The hot deformation characteristics. of as-cast nickel-base superalloy GH742y after hot isostatic pressing (HIP)(hereafter referred to as-cast alloy) have been investigated by hot compression tests in the temperature range of 1050 to 1140 degrees C, strain rate range of 0.01 s(-1) to 10 s(-1) and strain range of 35% to 50% by means of Gleeble-3500 thermal mechanical simulator. The results show that the as-cast alloy exhibits the poor deformability,and shows wedge-shaped cracking beyond the strain of 35%. At strain rates less than 1.0 s(-1), the stress-strain curves exhibit nearly steady-state behavior, while at strain rate of 10 s(-1), a yield drop and serrated yielding occur. The activation energy values developed on the basis of the experimental data are divided into three domains. The first domain appears at lower strain rate (<= 1.0 s(-1)) and lower temperature (<= 1080 degrees C), with the lowest mean value of activation energy about 261.4 kJ/mol. The second domain appears at the same strain rate as the first domain, but higher temperature (>1080 degrees C), with the intermediate mean value of activation energy about 328.8 kJ/mol. The third domain appears at higher strain rate (10 s(-1)) and temperature range of 1050 to 1140 degrees C, with the largest mean value of activation energy about 605.05 kJ/mol. Three different constitutive equations are established in corresponding to domains. Microstructural observations in the third domain reveal non-uniform dynamic recrystallization (DRX) of homogeneous gamma phase, which leads to the poor deformability and the highest Q value. In contrast, microstructures in the first domain show fully DRX of homogeneous gamma phase, leading to the better deformability and the lowest Q value. It is noted that the grain size increases with the increment of strain rate or temperature. These results suggest that bulk metal working of this material may be carried out in the first domain where fully DRX of gamma homogeneous occurred.

Nickel base superalloy GH4049 prepared by powder metallurgy

Short-Term Oxidation Behavior, Microstructure Evolution and Compression Behavior of Nickel-Based Superalloy GH4037 in Solid and Semi-Solid States

Effect of the Powder Size Distribution on the Hot Deformation Behavior of a Novel Nickel-based Powder Metallurgy Superalloy

A nickel-base superalloy with refined microstructures and excellent mechanical properties prepared by selective laser melting

Microstructure and Mechanical Properties of New Third-Generation Nickel-Based Powder Superalloy

Hot Deformation Characteristics for a Nickel-base Superalloy GH742y

Thermal processing behaviour and microstructural evolution of high W and high γ' content extruded nickel-based powder metallurgy superalloy FGH4109

Supersolidus liquid phase sintering of Inconel 718 powder alloy

Microstructure and Mechanical Properties of a Novel Powder Metallurgy Nickel-Base Superalloy

Size-dependent Microstructure Evolution and Formation Mechanisms During the Gas Atomization Process of FGH4113A Ni-based Superalloy Powder

Hot deformation behavior and microstructure evolution of a novel nickel-based powder metallurgy superalloy

Processing, Microstructures and Mechanical Properties of a Ni-Based Single Crystal Superalloy

Identification of Precipitates in the As-cast Microstructure and Its Dissolution Behavior During Homogenization of Difficult-to-Deform GH4141 Superalloy

High Temperature Deformation Behavior and Microstructure Evolution of Wrought Nickel-Based Superalloy GH4037 in Solid and Semi-Solid States

Hot Deformation Behavior of a Powder Metallurgy Superalloy with High γ′ Content

Investigation of Solidification Behavior in a New High Alloy Ni-Based Superalloy

Characterization of Interfacial Bonding Mechanism for Graphene-Modified Powder Metallurgy Nickle-Based Superalloy

A novel short-process manufacturing method of γ′-strengthened superalloy: Modulation of nano-scaled γ′ precipitates during hot deformation

Nano-twin-induced Exceptionally Superior Cryogenic Mechanical Properties of a Ni-based GH3536 (hastelloy X) Superalloy

Solidification behaviour and hot cracking susceptibility of a novel Ni-based superalloy

New Research Development of Superalloy GH4169