Abstract:Additive manufacturing (AM) is a highly promising technique for producing near-net-shape high-value aerospace components with intricate geometries. However, due to the susceptibility to hot cracking, high-volume-fraction Ni 3 (Al,Ti)-type precipitation-strengthened Ni-base superalloys typically used for these applications are usually difficult or even infeasible to manufacture via AM. Previous metallurgical methods to mitigate hot-cracking in AM usually compromise strength, resulting in a trade-off between hot-cracking resistance and strength. Here, we overcome this trade-off in AM of a multicomponent Ni-rich precipitation-strengthened high-entropy alloy (MNiHEA) Ni 46.23 Co 23 Cr 10 Fe 5 Al 8.5 Ti 4 W 2 Mo 1 C 0.15 B 0.1 Zr 0.02 (at%): synergizing remarkable hot-cracking resistance and ultrahigh strength. Crack-free MNiHEA is successfully fabricated via laser powder bed fusion (LPBF) without preheating, despite its high (Al+Ti) content of ∼7.4 wt%. This remarkable resistance to hot cracking arises from the comparatively low critical solidification range, the small average solidification cracking index, the suppression of the intermetallic phases in solidification, and the moderate hardening rate induced by the nanoprecipitates in aging, which are intrinsically imparted by thermodynamic and mechanical characteristics. The yield strength of the as-built-to-aged MNiHEA reaches ∼1.2 gigapascal, together with acceptable ductility. This ultrahigh strength outperforms its cast-to-aged counterpart by more than one-third and existing commercial superalloys CM247 and IN738LC. Such pronounced enhancement in strength is attained through multiple strengthening mechanisms, including solid-solution hardening, dislocation hardening, precipitation-hardening and grain-boundary strengthening. Our results demonstrate that intrinsic hot-cracking resistance can be utilized as a new metallurgical concept for mitigating hot-cracking without compromising strength in AM of high-temperature materials such as HEAs and superalloys.

A nickel-base superalloy with refined microstructures and excellent mechanical properties prepared by selective laser melting

Mechanical Properties and Fracture Behavior of Laser Powder-Bed-Fused GH3536 Superalloy

High-temperature Oxidation Behavior of AlCoCrCuFeNi High-Entropy Alloy by Selective Laser Melting

In-situ Study of Microstructure and Mechanical Properties of GH3536 Alloy Manufactured by Selective Laser Melting at 750 °C

Microstructure And Mechanical Properties Of Laser Melting Deposited Gh4169 Superalloy

Influence of Various Heat Treatments on Microstructures and Mechanical Properties of GH4099 Superalloy Produced by Laser Powder Bed Fusion

Laser powder bed fusion of GH3536 nickel-based superalloys: Processing parameters, microstructure and mechanical properties

Anisotropy in microstructure and mechanical properties of additively manufactured Ni-based GH4099 alloy

GH3536 Superalloy Prepared by Selective Laser Melting: Microstructure and Properties

Design of a novel crack-free precipitation-strengthened nickel-based superalloy and composites for laser powder bed fusion

A Novel γ'-Strengthened Nickel-Based Superalloy for Laser Powder Bed Fusion

Study on Crack Behavior of GH3230 Superalloy Fabricated via High-Throughput Additive Manufacturing

Microstructure evolution and formation mechanism of a crack-free nickel-based superalloy fabricated by laser engineered net shaping

Solidification behaviour and hot cracking susceptibility of a novel Ni-based superalloy

Investigation of GH3625 alloy: Contrasting microstructures, mechanical properties, and corrosion performance via conventional and extreme high speed laser material deposition

Microstructural Characteristics and Mechanical Properties of an Additively Manufactured Nickel-Based Superalloy

Effect of Synchronously Followed Thermal Environment on Microstructure and Mechanical Properties of FGH4096 Superalloy Prepared by Laser Melting Deposition

Influence of Scanning Strategy and Post-Treatment on Cracks and Mechanical Properties of Selective-Laser-Melted K438 Superalloy

Phase constitution, microstructure and mechanical properties of a Ni-based superalloy specially designed for additive manufacturing

A precipitation strengthened high entropy alloy with high (Al+Ti) content for laser powder bed fusion: Synergizing in trinsic hot cracking resistance and ultrahigh strength

Microstructure and Mechanical Properties of Superalloy Laser Welded Joints for GH3625 Fabricated by Laser Additive