Abstract:The high cracking susceptibility is the major barrier hindering the broad adoption of additive manufacturing (AM) in traditional non-weldable superalloys. It is particularly important to explore the role of elements during the AM processing and establish a new alloy design criterion. In this study, the effect of carbon, a critical element that influences the solidification and mechanical properties of superalloys, on the printability and mechanical properties of a typical non-weldable Inconel 738 (IN738) alloy processed by laser powder bed fusion (LPBF) was studied. Different from the limitation of low carbon content in traditional superalloy design, it was found that a moderate increase of carbon content from 0.11 wt% (alloy IN738LC) to 0.3 wt% (alloy IN738-0.3 C) and 0.6 wt % (alloy IN738-0.6 C) can produce crack-free LPBF samples in a wide range of processing parameters. The effect of carbon content on the microstructure, tensile properties and cracking susceptibility of the LPBF-printed alloys was evaluated. With the increase of carbon content, more granular monocarbides of no more than 200 nm in size form into a quasi-continuous or continuous network at the boundaries of cellular structures, while the low melting-point phases containing boron and gamma/gamma ' eutectics at cellular boundaries are significantly reduced. The susceptibility to solidification cracking and liquation cracking is substantially decreased owing to the reduced level of element segregation, elimination of initiation source for liquid films, and decrease of local strain con-centration. As a result, LPBF IN738-0.3 C and IN738-0.6 C show excellent ultimate tensile strength (1320 and 1598 MPa) and superior total elongation (14.7% and 9.0%), respectively. The results above demonstrate the different roles of carbon element in AM and the potential for designing AM non-weldable superalloys with improved printability and mechanical properties via alloy composition optimization.

Study on Crack Behavior of GH3230 Superalloy Fabricated via High-Throughput Additive Manufacturing

Mechanical Properties and Fracture Behavior of Laser Powder-Bed-Fused GH3536 Superalloy

On the influence of alloy composition on the additive manufacturability of Ni-based superalloys

Influence of GH4169 Addition on Cracking Control, Microstructure and Mechanical Properties of GH4169 / K465 Composite Material Manufactured by Selective Laser Melting

Cracking Behaviour and Its Suppression Mechanisms with TiB2 Additions in the Laser Additive Manufacturing of Solid-Solution-strengthened Ni-based Alloys

The effect of carbon content on the printability and mechanical properties of Ni-based superalloy in laser additive manufacturing

Phase constitution, microstructure and mechanical properties of a Ni-based superalloy specially designed for additive manufacturing

Crack Inhibition and Performance Modification of NiCoCr-Based Superalloy with Y2O3 Nanoparticles by Laser Metal Deposition

Effects of Co and Nb on the Crack of Additive Manufacturing Nickel-Based Superalloys

Avoiding Cracks in Additively Manufactured Non-Weldable Directionally Solidified Ni-based Superalloys

Selective laser melting of the hard-to-weld IN738LC superalloy: Efforts to mitigate defects and the resultant microstructural and mechanical properties

Crack Formation and Control in an AlCoCrFeNi High Entropy Alloy Fabricated by Selective Laser Melting

Origin of hot cracking formation and suppression method in laser additive manufactured nickel-based superalloys

Effect of Carbon Content on the Microstructure, Tensile Properties and Cracking Susceptibility of IN738 Superalloy Processed by Laser Powder Bed Fusion

Alloys-by-design: Application to new superalloys for additive manufacturing

Microstructure and stress-rupture property of DD32 nickel-based single crystal superalloy fabricated by additive manufacturing

A nickel-base superalloy with refined microstructures and excellent mechanical properties prepared by selective laser melting

Microstructure Evolution and Corrosion Performance of Additively Manufactured GH4099 Superalloy Produced by Selective Laser Melting

Cracking mechanism of Hastelloy X superalloy during directed energy deposition additive manufacturing

Design of a novel crack-free precipitation-strengthened nickel-based superalloy and composites for laser powder bed fusion

Mitigating hot-cracking of laser melted CoCrFeNiMnTix high-entropy alloys