Abstract:For gas metal arc welding, the effect of CO2 mixture in a shielding gas on a metal transfer process was investigated through the observation of the plasma characteristics and dynamic behaviour at the droplet’s growth-separation-transfer by the temperature measurement methods which were suitable, respectively, to the argon plasma region and the metal plasma region. At the present experimental conditions, the metal transfer process was a spray transfer type with 100%Ar shielding gas. On the other hand, with 85%Ar + 15%CO2 shielding gas, the metal transfer process was a globular transfer type in which the arc length was shorter, the width was narrower and the time interval of the droplet separation was longer. For both shielding gases, the metal plasma region near the arc central axis exhibited 6500–7500 K, which was lower than the argon plasma region. With 85%Ar + 15%CO2 shielding gas, when the metal droplet grew below the electrode wire, the region below the droplet has a high plasma temperature and a high concentration of iron vapour which surrounded the droplet. The region also exhibited a remarkably high electron number density. At the spray transfer process, the argon plasma region had an electron number density twice as high as the metal plasma region. Meanwhile, at the globular transfer process, the metal plasma region had a higher electron number density than the argon plasma region, which corresponded to a higher electrical conductivity near the arc axis. This means that the electric current goes through the arc axis easier than the spray transfer process. This condition increases the temperature below the droplet. The thermal expansion increases the force preventing the droplet from falling down. In consequence, the metal transfer takes the globular transfer type.

Study on Metal Transfer of MIG/MAG

An investigation of metal transfer process in GMAW

Current research status and prospect of metal transfer process control methods in gas metal arc welding

Analysis of Controlled Driving and Spreading Behavior of Molten Pool in Cold Metal Transfer

Investigation of Droplet Transfer Behaviours in Cold Metal Transfer (CMT) Process on Welding Ti-6Al-4V Alloy

Study on Arc Behavior and Weld Formation of Magnetically Controlled Narrow Gap TIG Welding

Role of material properties on metal transfer dynamics in gas metal arc welding

Experimental measurement of fluid flow in high-speed GMAW assisted by transverse magnetic field

Analysis of dynamic plasma behaviors in gas metal arc welding by imaging spectroscopy

Advancing Methodologies for Elemental Transfer Quantification in The Submerged Arc Welding Process: A Case Study of CaO-SiO2-MnO Flux

Dynamic Metal Transfer Behavior in Double-Wire DP-GMAW of Aluminum Alloy Under Different Pulse Phases

Analysis of dynamic plasma behaviours in gas metal arc welding by imaging spectroscopy

Numerical simulation of metal transfer in argon gas-shielded GMAW

Effect of high-frequency phase shift on metal transfer and weld formation in aluminum alloy double-wire DP-GMAW

3D Numerical Study of External Axial Magnetic Field-Controlled High-Current GMAW Metal Transfer Behavior

Study on Short-Circuiting GMAW Pool Behavior and Microstructure of the Weld with Different Waveform Control Methods

Stability Analysis of Metal Active-Gas Welding Short-Circuiting Transfer Based on Input Pulsating Energy

Visualization of gas metal arc welding on globular to spray transition current

Measurement and calculation of plasma drag force in arc welding based on high-speed photography technology and particle dynamics

Numerical Simulation of Arc and Droplet Behaviors in TIG-MIG Hybrid Welding

Experimental and Simulation Study of Babbitt Alloy/Steel Composite in Swing Cold Metal Transfer (CMT) Welding Under Different Heat Input