Abstract:This study focused on the numerical simulation of the distribution of residual stress in yttria-stabilized zirconia (YSZ) coatings prepared with atmospheric plasma spraying (APS). We particularly investigated the stress distribution around the interface between the top coat and bond coat. During thermal spray deposition, droplets and particles deposit on the substrate in a complex manner, causing interface waviness and non-uniform stress distribution. Therefore, residual stress is an important consideration when preparing thermal barrier coatings (TBCs). Residual stresses directly affect the performance of bond coats (BCs) and ceramic top coats (TCs). To accurately evaluate residual stress, we considered interface waviness and the thickness of the ceramic top coat and conducted a detailed analysis of stress distribution. The results show that compressive stress exists at the TC/BC interface, which may be caused by the mismatch in the thermal expansion coefficient between the YSZ top coat and the substrate, potentially leading to coating delamination. Moreover, the residual stress at the TC/BC interface significantly increases with an increasing YSZ thickness. When the top-coat thickness exceeds 300 μm, stress concentration and failure of the coating are likely to occur. Meanwhile, the optimized thermal spray experiment results confirm that the residual stress at the BC/YSZ interface of the thermal barrier coating is tensile stress, with a maximum value of 155 MPa, which is consistent with the finite element calculation results. Furthermore, the failure modes of TBCs with rough interface conditions are discussed in detail. Our research provides important guidance for TBC design and optimizing their performance.

The Effects of Substrate Temperature on the Residual Stress for EBPVD TBCs

The effects of substrate temperature on the residual stress for EBPVD

Numerical Simulation of Residual Stress During Microlayer Composite Material Processing by Ebpvd Technique

Experimental Investigation of Residual Thermal Stress in Thermal Barrier Coating (Tbc)

Sintering and Failure Behaviour of Eb-Pvd Thermal Barrier Coating after Isothermal Treatment

Effect of substrate temperature on microstructure and residual stress of EB-PVD ZrO2 coating

Characterization of EBPVD Micro-Layer Composites and Simulation of Its Internal Stress State

Effects of Residual Stress on the Mechanical Properties of Plasma-Sprayed Thermal Barrier Coatings

Finite element modeling of residual stress of Ti/TiAl multilayer composites prepared by electron beam physical vapor deposition technology

Effect of Top-Coat Thickness and Interface Fluctuation on the Residual Stress in APS-TBCs

Simulation of Residual Stresses and Their Effects on Thermal Barrier Coating Systems Using Finite Element Method

Study of Failure of EB-PVD Thermal Barrier Coating Upon Near-Α Titanium Alloy

A Theoretical Model for Predicting Residual Stress Generation in Fabrication Process of Double-Ceramic-Layer Thermal Barrier Coating System

Effects of oxide thickness, Al2O3 interlayer and interface asperity on residual stresses in thermal barrier coatings

Preparing and Study of EB-PVD Thermal Barrier Coatings on Titanium Substrates

Finite Element Analysis of Stress Field of Thermal Barrier Coating during the Deposition Process

Numerical and Experimental Investigation of Residual Stress in Thermal Barrier Coatings During Aps Process

Microstructure Dependence of Effective Thermal Conductivity of EB-PVD TBCs

The Influence of Bondcoat and Topcoat Mechanical Properties on Stress Development in Thermal Barrier Coating Systems

FEM analysis of stress distribution in metal/ceramic multi-layer composites prepared by EBPVD technique

Evolution of Residual Stresses in PS-PVD Thermal Barrier Coatings on Thermal Cycling